Surrey · England

Bath Repair for Walton-on-Thames homes

We travel to Walton-on-Thames for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Walton-on-Thames

Bath repair in Walton-on-Thames without replacing anything

Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with hairline or through cracks in acrylic and holes from dropped items, we can help.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Rusty chip next to a bath plughole, before and after repair
Location
Walton-on-Thames (KT12, KT13)
County
Surrey
Guarantee
12 months on all our work
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

The process

Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the next day.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.

Get a free quote

Advice

What we can’t put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

When to call us in Walton-on-Thames

Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.

If you can see any of these, send us a picture:

  • Impact holes in acrylic
  • Damage done while the bathroom was being fitted
  • Damage beneath the taps
  • Cracks in an acrylic bath

Comparing quotes

  • Whether there are any call-out or travel charges
  • What happens if they find more damage
  • Who turns up on the day
  • When it can be used again

Our hiring checklist

Why repair rather than replace?

A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why us?

  • Everything repaired in place
  • Every repair guaranteed for a year
  • No extra charge for your area
  • Honest advice, even when it means no job

See our full price list or resurfacing vs replacement cost guide.

How to look after the repair

Aftercare is simple, and it makes a real difference:

  • Stick to mild cleaners and a soft cloth
  • Don’t leave a fresh chip for long
  • Cover the bath during DIY or decorating
  • Ensure an acrylic bath is firm underfoot

Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.

Covering Walton-on-Thames

Walton-on-Thames is about 9 miles north-east of Woking, in Surrey. Jobs in Walton-on-Thames are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Walton-on-Thames is one of 395 places in Surrey where we work. Our jobs stretch from Walton-on-Thames to London (about 16 miles away).

We cover every part of KT12 and KT13 and the streets around it. Local streets include High Street, Sidney Road and Stuart Avenue, and we cover them all. Main roads around Walton-on-Thames include the A244 and B365, so getting to you is simple. Other places close to Walton-on-Thames include Hersham (1 mile south), Shepperton (2 miles north-west), Burwood Park (2 miles south-west), Weybridge (2 miles south-west) and St George's Hill (2 miles south-west). Within a short drive, we also cover Guildford (12 miles south-west), Woking (9 miles south-west), Camberley (14 miles west), Epsom (7 miles south-east), Redhill (14 miles south-east) and Ewell (7 miles east).

Near you in Walton-on-Thames

Around Walton-on-Thames, we work in homes near Sunbury Park, Walton Oak Primary School and St John, among other places. For rail, the closest station is Walton-On-Thames station, roughly 0.8 miles south. Other landmarks nearby include Elmbridge Museum (2.2 miles south-east) and No. 2 New Zealand General Hospital (0.8 miles west). Open spaces near Walton-on-Thames include Kempton Park Reservoirs and Ferris Meadow Lake.

Map of Walton-on-Thames © OpenStreetMap contributors

For landlords and businesses

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We work for landlords, letting agents and housing providers in Walton-on-Thames as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Common questions in Walton-on-Thames

Can a cracked acrylic bath be fixed?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we will ask for another angle.

How invisible is a bath repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

Something went through my bath. Can it be fixed?

In most cases. Photos of the hole and the underside help us check.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

What happens next?

We review the pictures and send a fixed quote with dates.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

What affects the price in Walton-on-Thames

Prices start from £95. Every quote is fixed and free. What we take into account:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • Unusual colours or finishes
  • How many areas need work

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Getting a price from pictures

The better the photos, the more accurate the price. Here’s what helps:

  • A coin or ruler next to the damage for scale
  • A wider photo showing the entire bath
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare

For a price in Walton-on-Thames, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.