West Berkshire · England
Bath chip & crack repair in Stanmore, West Berkshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Stanmore. Free, fixed quotes from your pictures.
- Repairs from £95
- Cracks in an acrylic bath
- Rusty patches near the plughole
Bath repair in Stanmore without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. If you are dealing with a hole punched through by something heavy and scuffs and scratches in the surface, we can help, on pressed steel enamel, roll-top & freestanding and acrylic alike.
All our work comes with our one-year guarantee, wherever you are in West Berkshire.
- Location
- Stanmore (RG20)
- Area hub
- West Berkshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Landlords, agents and businesses in Stanmore
If you manage property in Stanmore, we will quote for several properties at once. Send photos for each one and we will price them together.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Signs you need bath repair in Stanmore
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
These are the problems we are asked about most:
- Rusty patches near the plughole
- Chips on the rim or sides
- A hole punched through by something heavy
- Chips caused by builders
Before you book anyone
- What preparation is included
- How the colour is matched
- When it can be used again
- Whether the price covers travel
About Stanmore
Stanmore is about 8 miles north of Newbury, in West Berkshire. Our technicians come to customers in Stanmore and nearby villages, so you don’t need to take anything anywhere. Our technicians cover 155 places in West Berkshire, from the larger towns to small villages. We work right across the region, from Stanmore to London (about 52 miles away).
Jobs in RG20 work the same way as everywhere else we cover. Neighbouring places we cover include Catmore (2 miles north-west), West Ilsley (2 miles north), Brightwalton (3 miles west), Brightwalton Green (3 miles west) and Farnborough (3 miles north-west). We also work in nearby towns such as Newbury (8 miles south), Thatcham (8 miles south), Burghfield Common (13 miles south-east), Speenhamland (7 miles south), Hungerford (11 miles south-west) and Calcot (12 miles east).
Near you in Stanmore
Locally, our jobs take us to homes close to Beedon C.E. (Controlled) Primary School and Church of St Nicholas. Other landmarks nearby include Hampstead Norris Castle (3.7 miles south-east). Open spaces near Stanmore include Churn Hill.
Stanmore questions
How long before I can use the bath?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How do I get a price for bath repair in Stanmore?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repair or replace in Stanmore?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Stanmore. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Stanmore customers choose us
- Straight answers about what a repair can do
- One visit for most repairs
- Work done at your home or business
- A year’s guarantee on all work
Take a look at our prices page and guide to resurfacing and replacement costs.
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- What the surface is made of
- Whether old repairs or coatings need taking off
- What kind of damage it is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
For a price in Stanmore, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Places near Stanmore
Other services in Stanmore
About our accreditations · Every repair comes with a one-year guarantee.
