Northamptonshire · England

Bath Repair in Stanwick

Chip and crack repairs to enamel, acrylic and cast iron baths in Stanwick, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Deep scratches in acrylic
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Stanwick

What we do, step by step

Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a morning or an afternoon. Before we go, we will explain when it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the next day.

Getting ready for the visit

  • Let us know about parking or access
  • Keep children and pets away from the room on the day
  • Tell us if there are stairs or a lift

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.

Get a fixed price

Related advice

Bath repair in Stanwick, done in place

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Whether it’s rust by the waste and overflow and chips caused by builders, we can help, whatever the material.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Stanwick (NN9)
County
Northamptonshire
Warranty
12 months on all our work
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

Stanwick and the surrounding area

Stanwick is about 3 miles north-east of Rushden, in Northamptonshire. Across the NN9 area, we carry out the work at your property. Our repair technicians cover 364 places in Northamptonshire. You can also see our page for Birmingham, about 57 miles away.

We cover every part of NN9 and the streets around it. Jobs here include addresses on High Street, Raunds Road and Church Street and the roads around them. If you are just outside Stanwick, we cover Titty Ho (1 mile north-east), Raunds (1 mile north-east), Chelveston (1 mile south-east), Caldecott (2 miles south) and Little Addington (2 miles north-west). We also work in nearby towns such as Northampton (15 miles south-west), Corby (12 miles north-west), Kettering (8 miles north-west), Wellingborough (6 miles west), Rushden (3 miles south-west) and Desborough (13 miles north-west).

Near you in Stanwick

Locally, our jobs take us to homes close to Church of St Lawrence, Manor School and Sports College and Stanwick Academy and the streets around them. Other landmarks nearby include Rushden Museum (3.5 miles south-west) and Rushden Lakes (3.4 miles south-west). For a walk, there’s Irthlingborough Lakes and Meadows.

Map of Stanwick © OpenStreetMap contributors

What bath repair costs

Prices start from £95. We give every job a fixed price from pictures. These are the things that affect it:

  • Access to the area
  • Unusual colours or finishes
  • The material and finish
  • The type of damage

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

How to get a fixed quote

Two or three clear pictures are generally enough. It helps if you send:

  • Natural light rather than flash
  • The material, if you know it
  • Any earlier repairs or coatings
  • Where you are, by postcode

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.

How to look after the repair

Much of the damage we repair could have been avoided. A few tips:

  • Store metal items away from the bath
  • Cover the bath during DIY or decorating
  • Keep abrasive pads and gritty cleaners away from the bath
  • Clean with warm water and a mild detergent

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

Landlord and trade work in Stanwick

Housing associations and facilities teams use us for planned and reactive repairs in Northamptonshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

For anyone letting property in or around Stanwick, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Common questions in Stanwick

Can I add another job to the visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do you cover the entire of Northamptonshire?

We work UK-wide, and that includes Stanwick. Prices do not change with location.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Do you work in Stanwick?

Yes. We cover the entire UK and come to Stanwick. Send us pictures for a fixed quote, or call 0345 017 0787.

Can a cracked acrylic bath be fixed?

Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Do you need bath repair in Stanwick?

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Customers usually contact us about:

  • Holes from dropped items
  • A failed DIY repair that’s discoloured or lifting
  • Rusty patches near the plughole
  • Deep scratches in acrylic

Comparing quotes

  • Is the price fixed, and does it include VAT?
  • The length of the guarantee and what it covers
  • How to care for the finish
  • Whether the price covers travel

How to compare quotes

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

What we can’t put right

We will not take on work that will not last, so here’s what a repair cannot put right:

  • Wear across the whole surface, which needs re-enamelling
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we work on in Stanwick

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.