Bradford · England
Bath Repair in Stead
Bath repair in Stead without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Chips under the taps
- Deep scratches in acrylic
How we handle bath repair in Stead
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. You can generally use the bath the following day. If you are dealing with damage beneath the taps and hairline or through cracks in acrylic, we can generally put it right.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Stead (LS29)
- Region
- Bradford
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Places near Stead
More services for Stead
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
- Wear across the whole surface, which needs re-enamelling
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
What we’re called out for in Stead
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Typical reasons for a call-out include:
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Chips on the rim or sides
Before booking anyone
- How changes to the job are handled
- What the guarantee covers, and for how long
- What prep work is covered
- How your room will be protected
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- The material and finish
- How much damage there is
- How easy the damage is to reach
- Any earlier repairs that need removing first
We charge the same wherever you are, so there is no premium for Stead. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
Phone photos are fine. Just make sure we can see:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Landlord and trade work in Stead
We work for landlords, letting agents and housing providers in Stead as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Covering Stead
Stead is about 2 miles south-east of Ilkley, in Bradford. Our technicians come to customers in Stead and nearby villages, so you do not need to take anything anywhere. Stead is one of 140 places in Bradford we cover. We work right across the region, from Stead to Leeds (12 miles away).
We cover every part of LS29. If you’re just outside Stead, we cover Ben Rhydding (1 mile north-west), Burley in Wharfedale (1 mile east), Denton (2 miles north), Askwith (2 miles north-east) and Weston (2 miles east). We also work in nearby towns such as Bradford (8 miles south), Keighley (6 miles south-west), Bingley (5 miles south-west), Shipley (6 miles south), Baildon (5 miles south) and Great Horton (9 miles south).
What’s near Stead
We visit homes around Ben Rhydding Primary School, Cow and Calf Hotel and St John's and the streets around them. Also close by are Spencers Gardens (2 miles north-west) and Ilkley Grammar School (1.3 miles north-west). For rail, the closest station is Ben Rhydding station, about 1 mile north-west of the centre. Well-known places in the area include Manor House (1.9 miles north-west) and Scalebor Park Hospital (1.1 miles east). The countryside around Stead includes The Chevin.
Repair or replace in Stead?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
- No need to remove anything
- Fixed prices from your pictures
See our full price list and resurfacing vs replacement cost guide.
Your questions about bath repair in Stead
Do you cover the entire of Bradford?
The whole UK, including all of Bradford. Just include your postcode and we’ll offer you dates.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
What happens next?
We come back with a fixed quote, plus dates. There is no obligation to book.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before we go, we will explain how long to leave it and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
How to get a price
Email us a photo of the damage and one of the entire item, and tell us you are in Stead, and we’ll come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
