Bradford · England
Bath chip & crack repair in Denton, Bradford
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Denton and across Bradford. Free, fixed quotes from your photos.
- Repairs from £95
- A chip where the taps sit
- Chips caused by builders

Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How we handle bath repair in Denton
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Common call-outs are for scuffs and scratches in the surface and hairline or through cracks in acrylic, across cast iron enamel, acrylic and pressed steel enamel.
All of our repairs are guaranteed for twelve months in Denton and everywhere else. We return to put right any problem with the work.
- Area
- Denton (LS29)
- Region
- Bradford
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- How much damage there is
- What kind of damage it is
- The material and finish
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
You can normally get a fixed price without us visiting. To help us price it:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take two to three hours for most chips, and you can get on with other things while we are there.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Open a window if you can
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Ask for a price
Upload a photo of the damage and one of the whole item, and tell us you are in Denton, and we will come back with a fixed quote.
Advice
Towns and villages near Denton
Other services in Denton
Denton: your questions answered
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Bradford.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and you will get one combined price.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed price without visiting.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How long does the repair take to cure?
Normally the day after. We confirm the time before we leave.
Signs you need bath repair in Denton
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
The things clients typically mention when they call include:
- A failed DIY repair that’s discoloured or lifting
- Rusty patches near the plughole
- Impact holes in acrylic
- A cracked acrylic bath
Before booking anyone
- If travel is included in the price
- What happens if the damage is worse than the photos show
- How the colour is matched
- How long it needs to cure
What we cannot put right
Some jobs are not right for a repair, for example:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Covering Denton
Denton is about 2 miles north-east of Ilkley, in Bradford. Whether you’re in the middle of Denton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 140 places in Bradford, from the larger towns to small villages. You can also see our page for Leeds, about 13 miles away.
All of LS29 is within our area. We regularly work on streets such as Smithy Lane and Denton Road and the roads around them. If you are just outside Denton, we cover Ben Rhydding (1 mile south-west), Askwith (2 miles east), Stead (2 miles south), Burley in Wharfedale (2 miles south-east) and Weston (2 miles south-east). Further out, we also cover Bradford (10 miles south), Keighley (7 miles south-west), Bingley (6 miles south), Shipley (7 miles south), Baildon (6 miles south) and Great Horton (11 miles south).
What’s near Denton
Typical jobs here are in homes near Church of St Helen and Ilkley Grammar School. The closest station to Denton is Ben Rhydding station, roughly 1.1 miles south-west. Further afield, we also cover the area around Ilkley Coronation Hospital (1.7 miles south-west) and Manor House (1.9 miles south-west). Not far away are The Chevin.
Keeping it looking good
Once the work has cured, treat it gently:
- Get any new chip repaired before it rusts
- Do not scrub with anything abrasive
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.

