Highland · Scotland

Bath Repair for Stoer homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Stoer, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips caused by builders
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Stoer

How we handle bath repair in Stoer

Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s rust by the waste and overflow and a chip where the taps sit, we can help.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Before and after: a chipped, rust-stained bath around the plughole
Location
Stoer (IV27)
County
Highland
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

How to look after the repair

To keep it looking its best:

  • Get any new chip repaired before it rusts
  • Stick to mild cleaners and a soft cloth
  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale

There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.

When to call us in Stoer

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.

Get in touch if you’ve noticed:

  • Holes from dropped items
  • Chips along the edge of the bath
  • An old repair that has yellowed or come loose
  • Snagging damage from a refit

Before you book anyone

  • What the guarantee covers, and for how long
  • Is the price fixed, and does it include VAT?
  • When it can be used again
  • Aftercare advice

Our hiring checklist

What happens on the day

We agree an arrival time beforehand. On site, it takes a few hours for most jobs. We leave the room clean and you will know when it can be used.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available

How to get a price

For a price in Stoer, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Read more

What bath repair costs

Prices start from £95. You’ll know the full cost before booking. We take into account:

  • The material and finish
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed quote

It only takes a minute to photograph the damage. Try to send:

  • Daylight if possible, and no flash reflection
  • One picture of the entire bath
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale

To get a price, send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Landlords, agents and businesses in Stoer

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

FAQs for Stoer

Something went through my bath. Can it be fixed?

Often, if there’s access underneath. We back the hole, fill it and refinish the surface.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Is repairing better than replacing?

Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

What happens next?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

Will the repair show?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

Which areas do you work in?

We cover the whole UK, including Stoer and the rest of Highland. Send your postcode with your pictures and we’ll confirm dates.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Stoer.

Different materials, different repairs

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Honest limits

Not everything can be repaired, and we will tell you before we start. We cannot fix:

  • A bath worn all over, where resurfacing makes more sense
  • A bath that moves underfoot, until its support is fixed
  • Rust that has eaten right through a steel bath

If in doubt, send pictures and we will say what we think before booking.

Surfaces we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

Stoer and nearby

Stoer is about 38 miles east of Stornoway, in Highland. Jobs in Stoer are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Stoer is one of 253 places in Highland we cover.

Every address in IV27 is covered. We also travel to Stor (1 mile north-east), Lochinver (5 miles south-east), An Druim Beag (6 miles north-east), Scourie More (12 miles north-east) and Scourie (12 miles north-east). Some remote addresses need extra planning, so call us to arrange it.

Local landmarks in Stoer

Open spaces near Stoer include Loch na Claise.

Map of Stoer © OpenStreetMap contributors

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.