Cheshire East · England
Bath Repair for Stoke Bank homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stoke Bank and across Cheshire East. Send photos for a free, fixed quote.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
Repairing versus replacing in Stoke Bank
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- Honest advice, even when it means no job
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
Take a look at our full price list or guide to resurfacing and replacement costs.
Bath repair in Stoke Bank, done in place
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s a chip where the taps sit and cracks in an acrylic bath, we can usually put it right, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Stoke Bank (CW5)
- Region
- Cheshire East
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
When to call us in Stoke Bank
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we’re called about are:
- Rust spots around the plughole
- A chip where the taps sit
- Deep scratches in acrylic
- Holes from dropped items
Before you book anyone
- Whether the price is fixed and includes VAT
- What preparation is included
- Whether a trained technician does the job
- What aftercare is recommended
Stoke Bank and nearby
Stoke Bank is about 3 miles north-west of Nantwich, in Cheshire East. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stoke Bank is one of 254 towns and villages in Cheshire East we cover. We work right across the region, from Stoke Bank to Liverpool (25 miles away).
Our technicians cover all of CW5. That includes homes on Old Chester Road and Chester Road and the roads around them. Nearby, we also work in Barbridge (1 mile north-west), Wardle (1 mile north-west), Aston juxta Mondrum (2 miles east), Cholmondeston (2 miles north) and Worleston (2 miles east). Further out, we also cover Crewe (5 miles east), Nantwich (3 miles south-east), Middlewich (8 miles north-east), Sandbach (9 miles east), Coppenhall (5 miles east) and Holmes Chapel (11 miles north-east).
Around Stoke Bank
We visit homes around The Olde Barbridge Inn, among other places. The nearest railway station is Nantwich station, about 3.6 miles south-east of the centre. Other landmarks nearby include Nantwich Castle (3.3 miles south-east) and Nantwich Workhouse (3 miles south-east).
How to care for the repair
After the repair has cured, a few habits help it last:
- A dripping tap stains enamel, so fix it early
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
How we price bath repair
Repairs from £95. There is no area surcharge for Stoke Bank. The price reflects:
- How hard the colour is to match
- Any earlier repairs that need removing first
- The material
- The type of damage
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
- A picture taken from further back
For a price in Stoke Bank, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Stoke Bank
Also in Stoke Bank
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
Preparing for the visit
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
FAQs for Stoke Bank
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
About our accreditations · Every repair comes with a one-year guarantee.
