Cheshire East · England
Bath Repair in Worleston
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Worleston and across Cheshire East. Send pictures for a free, fixed quote.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips on the rim or sides
Bath repair at your home in Worleston
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Whether it’s damage done while the bathroom was being fitted and scuffs and scratches in the surface, we can generally put it right, whatever the material.
All our work comes with a one-year guarantee.
- Area
- Worleston (CW5)
- Region
- Cheshire East
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Worleston. What changes the price is:
- The size and number of damaged areas
- What the surface is made of
- Access to the area
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Quotes from your photos
We price nearly every job from pictures. This is what to send:
- Something in shot to show the size
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- One picture of the whole bath
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Also near Worleston
What else we do in Worleston
Your questions about bath repair in Worleston
What happens next?
We come back with a fixed quote, normally with dates to choose from. You’re under no obligation.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
How much does bath repair cost in Worleston?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does the repair take to cure?
Normally the day after. We will tell you the exact curing time when we finish.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Worleston customers choose us
- CHAS and Constructionline accredited
- Same prices wherever you are
- No need to remove anything
- Technicians who travel to you, UK-wide
Read our pricing and resurfacing vs replacement cost guide.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the next day, the bath is ready to use.
Getting ready for the visit
- Open a window if you can
- Make sure the area is dry
- Let us know about parking or access
Ask for a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Aftercare tips
Simple care helps the repair last. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath does not move when you stand in it
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Landlords, letting agents and housing providers in Worleston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About Worleston
Worleston is about 2 miles north of Nantwich, in Cheshire East. Wherever you are in the CW5 postcode area, we come to you. We work in all 254 towns and villages across Cheshire East. We work right across the region, from Worleston to Liverpool (about 27 miles away).
Our repair technicians cover all of the CW5 postcode area and the streets around it. Close by, we cover Aston juxta Mondrum (1 mile north-west), Stoke Bank (2 miles west), Barbridge (2 miles west), Wardle (3 miles west) and Cholmondeston (3 miles north-west). Larger places within reach include Crewe (3 miles east), Congleton (14 miles east), Knutsford (15 miles north-east), Middlewich (7 miles north-east), Sandbach (7 miles north-east) and Coppenhall (3 miles east).
What’s near Worleston
In Worleston, that means homes near St Oswald's Church, St Oswald's Worleston CofE Primary School and Queen's Park and the streets around them. The nearest railway station is Nantwich station, roughly 2.5 miles south. A little further out are Nantwich Castle (2.3 miles south) and Nantwich Workhouse (1.6 miles south).
- Local facilities include Crewe and Nantwich (1.3 miles east)
Do you need bath repair in Worleston?
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Send us a photo if you notice any of these:
- Chips caused by builders
- A chip where the taps sit
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
Before you book anyone
- When it can be used again
- Whether a trained technician does the job
- What preparation is included
- How the room is protected while they work
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Send us pictures and we’ll tell you honestly.
Materials we work on in Worleston
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
