Milton Keynes · England
Bath Repair in Stoke Hammond
Chip and crack repairs to enamel, acrylic and cast iron baths in Stoke Hammond, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath repair at your home in Stoke Hammond
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include a hole punched through by something heavy and chips along the edge of the bath, across cast iron enamel, roll-top & freestanding and pressed steel enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Stoke Hammond (MK17)
- Area hub
- Milton Keynes
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Materials we work on in Stoke Hammond
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the following day, the bath is ready to use.
Preparing for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Open a window if you can
How to get a price
For a price in Stoke Hammond, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
What we are called out for in Stoke Hammond
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Most people get in touch when they notice one of these:
- Chips along the edge of the bath
- A kit repair that didn’t last
- Rust spots around the plughole
- Cracks in an acrylic bath
Comparing quotes
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- How your room will be protected
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Nearby places to Stoke Hammond
Also in Stoke Hammond
Common questions in Stoke Hammond
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Stoke Hammond.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What bath repair costs
Prices start from £95. There is no area surcharge for Stoke Hammond. What changes the price is:
- How many areas need work
- Previous DIY repairs that have to come out
- The material and finish
- How easy the damage is to reach
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
You can take the pictures on your phone. Just make sure we can see:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Aftercare tips
Aftercare is simple:
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you are working above it
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Covering Stoke Hammond
Stoke Hammond is about 3 miles south of Bletchley, in Milton Keynes. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stoke Hammond is one of 73 towns and villages in Milton Keynes we cover. You can also see our page for London, about 41 miles away.
Our visits in MK17 work the same way as everywhere else we cover. Streets in the area include Olde Belle Close, Harrup Close and Manor Close, and we cover them all. We also cover the places around Stoke Hammond: Hollingdon (1 mile south-west), Soulbury (2 miles south), Newton Leys (2 miles north-west), Water Eaton (2 miles north) and Newton Longville (3 miles north-west). We also work in nearby towns such as Milton Keynes (6 miles north), Bletchley (3 miles north), Newport Pagnell (9 miles north), Furzton (4 miles north-west), Whitehouse (7 miles north-west) and Middleton (6 miles north).
Landmarks near Stoke Hammond
Locally, our jobs take us to homes close to The Dolphin pub, Sir Herbert Leon Academy and Church of St Luke and the streets around them. Stoke Hammond’s nearest station is Bletchley station, about 2.8 miles north. A little further out are The Holley/Cornelius Collection (3 miles north) and Bletchley Community Hospital (3.1 miles north-west). The countryside around Stoke Hammond includes Blue Lagoon and Blue Lagoon Park.
About our accreditations · Every repair comes with a one-year guarantee.
