Warwickshire · England
Bath Repair for Stratford-on-Avon homes
Bath repair in and around Stratford-on-Avon: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Chips along the edge of the bath
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Bath repair in Stratford-on-Avon without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with a failed DIY repair that’s discoloured or lifting and a chip where the taps sit, we can help, whatever the material.
All our work is covered by a one-year guarantee, wherever you are in Warwickshire.
- Area
- Stratford-on-Avon (CV47)
- Region
- Warwickshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Repairs from £95. We charge the same across the UK, including Stratford-on-Avon. The price reflects:
- The material
- Any earlier repairs that need removing first
- The type of damage
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- Details of any past repairs
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Places near Stratford-on-Avon
Also in Stratford-on-Avon
Aftercare tips
So the finish stays in good condition for years:
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Check that an acrylic bath does not move when you stand in it
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Where we work around Stratford-on-Avon
Stratford-on-Avon is about 6 miles west of Daventry, in Warwickshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Stratford-on-Avon is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 29 miles away.
All of CV47 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Cyrils Corner, Collins Close and Dog Lane. We also cover the places around Stratford-on-Avon: Napton on the Hill (1 mile south-west), Chapel Green (1 mile south-west), Stockton (2 miles north-west), Broadwell (3 miles north) and Southam (3 miles west). Within a short drive, we also cover Rugby (9 miles north), Warwick (11 miles west), Royal Leamington Spa (9 miles west), Leamington Spa (10 miles west), Kenilworth (13 miles north-west) and Brownsover (10 miles north).
Near you in Stratford-on-Avon
Typical jobs here are in homes near Church of St Lawrence, St Lawrence CofE (Voluntary Aided) Primary School and The Kings Head pub and the streets around them. Open spaces near Stratford-on-Avon include Arbury Hill.
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Stratford-on-Avon
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Stratford-on-Avon. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Free fixed quotes from pictures
- Work done at your home or business
- CHAS and Constructionline accredited
- Rooms protected and left tidy
Take a look at our full price list or guide to resurfacing and replacement costs.
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Stratford-on-Avon: your questions answered
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes two to three hours for most chips, and we’ll keep you posted as we go.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Common problems we fix in Stratford-on-Avon
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
The most common problems we’re called about are:
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
- Scuffs and scratches in the surface
- A kit repair that didn’t last
What to look for in a quote
- What happens if they find more damage
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
