Warwickshire · England
Bath chip & crack repair in Brownsover, Warwickshire
We travel to Brownsover for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Deep scratches in acrylic
How we handle bath repair in Brownsover
Most of our bath repairs take a few hours, and you can normally bathe again the next day. There is no need to book a plumber or tiler, because the bath does not move. Typical jobs include rust by the waste and overflow and damage beneath the taps, across cast iron enamel, pressed steel enamel and roll-top & freestanding.
Big or small, it’s backed by a one-year guarantee in Brownsover and across Warwickshire.
- Where
- Brownsover (CV21, CV23)
- Area hub
- Warwickshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we will tell you honestly before booking.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Keeping it looking good
Once the work has cured, treat it gently:
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Store metal items away from the bath
- Make sure an acrylic bath is firm underfoot
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
FAQs for Brownsover
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Do you come to Brownsover?
Yes, we do. Technicians travel to Brownsover from across the region, and the price is the same as everywhere else.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- The material and finish
- What kind of damage it is
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Natural light rather than flash
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Brownsover, and we’ll come back with a fixed quote.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Colour mixed on the day to match
- Rooms protected and left tidy
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and bath cost comparison.
When to call us in Brownsover
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Send us a picture if you notice any of these:
- Rusty patches near the plughole
- A chipped rim or side
- Chips under the taps
- Chips caused by builders
Questions to ask before you book
- How soon you can use it again
- How changes to the job are handled
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
What happens on the day
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a morning or an afternoon for most jobs. We leave the room clean.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Keep a parking space free if you can
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Towns and villages near Brownsover
What else we do in Brownsover
Covering Brownsover
Brownsover is about 2 miles north-east of Rugby, in Warwickshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 324 places in Warwickshire, from the larger towns to small villages. You can also see our page for Birmingham, about 28 miles away.
Every address in CV21 and CV23 is covered, from the main roads to the quietest streets. Streets in the area include Mill Lane, Lloyd Road and Sedge Road, and we cover them all. We also travel to Clifton upon Dunsmore (1 mile south-east), Rugby (2 miles south-west), Newbold-on-Avon (2 miles west), New Bilton (2 miles south-west) and Bilton (3 miles south-west). Within a short drive, we also cover Nuneaton (13 miles north-west), Royal Leamington Spa (14 miles south-west), Bedworth (12 miles north-west), Leamington Spa (14 miles south-west), Kenilworth (14 miles west) and Southam (11 miles south-west).
What’s near Brownsover
Around Brownsover, we work in homes near Boughton Leigh Infant School, Christ Church and The Bell and Barge pub. Brownsover’s nearest station is Rugby station, about 0.9 miles south-west of the centre. Other landmarks nearby include Clock Towers Shopping Centre (1.5 miles south-west) and St Luke's Hospital (1.4 miles south). Green spaces nearby include Swift Valley Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
