West Sussex · England
Bath chip & crack repair in Street End, West Sussex
We travel to Street End for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- A failed DIY repair that is discoloured or lifting
Street End questions
Can you repair a crack in an acrylic bath?
Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
Do you cover the entire of West Sussex?
We work UK-wide, so Street End is covered. Our prices are the same everywhere.
Do you cover Street End?
Yes. We cover the entire UK and travel to Street End. Send photos and we’ll quote, or call 0345 017 0787.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
How long before I can use the bath?
Generally within a day, though it depends on what we have done.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How we handle bath repair in Street End
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the next day. We are often asked to fix scuffs and scratches in the surface and holes from dropped items, in roll-top & freestanding, cast iron enamel and acrylic.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Street End (PO20)
- Area hub
- West Sussex
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Don’t leave razors or cans standing in the bath
- Get any new chip repaired before it rusts
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Nearby places to Street End
More services for Street End
Honest limits
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Signs you need bath repair in Street End
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Common reasons people in Street End contact us include:
- Holes from dropped items
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Who turns up on the day
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Street End and the surrounding area
Street End is about 4 miles north of Selsey, in West Sussex. Customers in Street End get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Street End is one of 371 towns and villages in West Sussex we cover. Our jobs stretch from Street End to London (58 miles away).
All of PO20 is covered. Whether you live on Church Lane, Selsey Road and Chalder Lane or anywhere nearby, we can come to you. If you are just outside Street End, we cover Sidlesham Common (1 mile north-west), Sidlesham (1 mile south), Keynor Estate (1 mile south), Fisher (1 mile north-east) and South Mundham (2 miles north-east). We also work in nearby towns such as Bognor Regis (5 miles east), Chichester (4 miles north), Selsey (4 miles south), Littlehampton (11 miles east), Emsworth (8 miles north-west) and Rustington (12 miles east).
Near you in Street End
In Street End, that means homes near Sidlesham Primary School and St Mary Our Lady Sidlesham. For rail, the closest station is Chichester station, about 3.2 miles north of the centre. A little further out are Chichester Castle (3.8 miles north) and Chichester Cathedral Treasury (3.4 miles north).
Repair or replace: which is better?
Replacing a fitted bath usually means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Street End customers choose us
- A year’s guarantee on all work
- Usually one visit, start to finish
- No need to remove anything
- One price list for the entire UK
Read our full price list or bath cost comparison.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
If you manage property in Street End, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
