West Sussex · England
Bath chip & crack repair in Fisher, West Sussex
Bath repair across Fisher and nearby, usually in one visit and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Impact holes in acrylic
About our bath repair in Fisher
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for scuffs and scratches in the surface and snagging damage from a refit, across pressed steel enamel, roll-top & freestanding and cast iron enamel.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Fisher (PO20)
- Region
- West Sussex
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Fisher?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
It’s worth getting a quote if you see:
- A failed DIY repair that’s discoloured or lifting
- Chips under the taps
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What to look for in a quote
- The length of the guarantee and what it covers
- How changes to the job are handled
- When it can be used again
- How to look after the finish
Nearby places to Fisher
What else we do in Fisher
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Do not scrub with anything abrasive
- Give the bath a quick rinse after use
- Have new chips seen to early
- Store metal items away from the bath
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. It normally takes two to three hours for most chips.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
How we price bath repair
Repairs from £95. There’s no area surcharge for Fisher. The price reflects:
- How much damage there is
- The colour and finish to match
- How many items we do on one visit
- The type of damage
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Common questions in Fisher
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
When can I have a bath again?
Usually within a day, depending on the repair.
Which areas do you work in?
Everywhere in the UK, Fisher included. Travel is included in the price.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Fisher.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why Fisher clients choose us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Work done at your home or business
Take a look at our prices page and resurfacing vs replacement cost guide.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Fisher and the surrounding area
Fisher is about 3 miles south of Chichester, in West Sussex. Jobs in Fisher are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in 371 places in West Sussex, from the larger towns to small villages. We work right across the region, from Fisher to London (56 miles away).
All of PO20 is within our area. If you’re just outside Fisher, we cover South Mundham (1 mile east), Street End (1 mile south-west), Sidlesham Common (1 mile west), Sidlesham (2 miles south-west) and Nyetimber (2 miles south-east). Further out, we also cover Bognor Regis (3 miles east), Chichester (3 miles north), Selsey (5 miles south), Littlehampton (10 miles east), Emsworth (9 miles north-west) and Rustington (11 miles east).
What’s near Fisher
Typical jobs here are in homes near Chichester High School For Girls and St Leodegar's Church. The nearest railway station is Chichester station, about 2.5 miles north. Other landmarks nearby include Chichester Cathedral Treasury (2.7 miles north) and Chichester Castle (3 miles north).
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Fisher
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
