Bury · England
Bath chip & crack repair in Strongstry, Bury
Bath repair for Strongstry, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- A chip where the taps sit
About our bath repair in Strongstry
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Typical jobs include holes from dropped items and rusty patches near the plughole, in pressed steel enamel, acrylic and roll-top & freestanding.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Strongstry (BL0)
- County
- Bury
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Repairs from £95. We don’t charge extra for travel to Strongstry. The price comes down to:
- What kind of damage it is
- What the surface is made of
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- Your postcode, so we can check dates
- Any details about the material
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Strongstry
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
How the visit works
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes two to three hours for most chips in most cases. We leave the room clean.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Getting ready for the visit
- Clear the area around the damage
- Open a window if you can
- Keep a parking space free if you can
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
FAQs for Strongstry
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is there any odour?
There may be a mild smell during the work.
Do you cover Strongstry?
Yes, we do. We send a technician to Strongstry for every job, with no extra charge for travel.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Places near Strongstry
More services for Strongstry
Landlords, agents and businesses in Strongstry
We work for landlords, letting agents and housing providers in Strongstry as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Signs you need bath repair in Strongstry
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Send us a photo if you notice any of these:
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Rust by the waste and overflow
- Deep scratches in acrylic
Before booking anyone
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- What prep work is covered
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Don’t leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- Store metal items away from the bath
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Strongstry and the surrounding area
Strongstry is about 2 miles north of Ramsbottom, in Bury. Anywhere in BL0, we come to you. We work in all 40 towns and villages across Bury. Our jobs stretch from Strongstry to Manchester (about 14 miles away).
We work across BL0. We regularly work on streets such as North Street and Strongstry Road and the roads around them. Nearby, we also work in Chatterton (1 mile south-east), Edenfield (1 mile east), Stubbins (1 mile south), Irwell Vale (1 mile north) and Shuttleworth (1 mile south-east). Larger places within reach include Bury (5 miles south), Radcliffe (7 miles south), Prestwich (10 miles south), Whitefield (8 miles south), Besses o' th' Barn (8 miles south) and Tottington (4 miles south).
Landmarks near Strongstry
Our customers here include homes close to Haslingden High School, Ramsbottom Stubbins Primary School and St Philip and the streets around them. For rail, the closest station is Entwistle station, about 4 miles west of the centre. A little further out are Helmshore Mills Textile Museum (Higher Mill) (1.9 miles north-west) and Rossendale General Hospital (2.2 miles north). For a walk, there’s Hail Storm Hill.
Repair or replace: which is better?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Strongstry
- Work done at your home or business
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- One price list for the entire UK
Read our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
