Doncaster · England
Bath Repair in Styrrup
Local bath repair for Styrrup: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
Landlords, agents and businesses in Styrrup
For anyone letting property in or around Styrrup, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Styrrup as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Bath repair at your home in Styrrup
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the following day. We are frequently asked to fix scuffs and scratches in the surface and chips on the rim or sides, on cast iron enamel, pressed steel enamel and acrylic.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Area
- Styrrup (DN11)
- Region
- Doncaster
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Styrrup: your questions answered
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Which areas do you work in?
We work UK-wide, and that includes Styrrup. Prices do not change with location.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
How we price bath repair
Repairs from £95. You’ll know the full cost before you book. We take into account:
- Unusual colours or finishes
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Any details about the material
Send us a picture of the damage and one of the entire item, with your DN11 postcode, and we’ll come back with a fixed quote.
How it works
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Getting ready for the visit
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say immediately if a repair is the right fix.
Related advice
When we’d advise against a repair
It helps to know what we cannot do:
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Styrrup
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Where we work around Styrrup
Styrrup is about 5 miles east of Maltby, in Doncaster. Clients in Styrrup get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover 89 places across Doncaster. You can also see our page for Leeds, about 34 miles away.
Our visits in DN11 work the same way as everywhere else we cover. That includes homes on Main Street, Pagdin Drive and Pinfold Lane. If you’re just outside Styrrup, we cover Harworth (1 mile north-east), Bircotes (1 mile north-east), Scrooby (3 miles east), Bawtry (3 miles north-east) and Austerfield (4 miles north-east). Within a short drive, we also cover Doncaster (8 miles north), Adwick le Street (12 miles north), Thorne (15 miles north), Conisbrough (8 miles north-west), Bentley (10 miles north) and Armthorpe (9 miles north).
Near you in Styrrup
We visit homes around Church of All Saints, Serlby Park Academy and Harworth CofE Academy, among other places. A little further out are Hospital of St Mary Magdalene (3 miles north-east) and Tickhill Castle (1.8 miles north-west).
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Styrrup
- Everything repaired in place
- Work done at your home or business
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
See our prices page and guide to resurfacing and replacement costs.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Places near Styrrup
Also in Styrrup
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Put a towel in the bath if you’re working above it
- Do not leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
About our accreditations · Every repair comes with a one-year guarantee.
