Leicestershire · England
Bath Repair in Sutton in the Elms
Chip and crack repairs to enamel, acrylic and cast iron baths in Sutton in the Elms, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- Chips along the edge of the bath
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price depends on:
- Access to the area
- Previous DIY repairs that have to come out
- What the surface is made of
- The size and number of damaged areas
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- A close-up of the damage, in focus
- What it’s made of, if you know
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
About our bath repair in Sutton in the Elms
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you’re dealing with a chip where the taps sit and chips caused by builders, we can normally put it right, whatever the material.
You get a one-year guarantee, the same in Sutton in the Elms as everywhere else we work.
- Where
- Sutton in the Elms (LE9)
- Area hub
- Leicestershire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
How to prepare
- Make sure the area is dry
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Sutton in the Elms. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Sutton in the Elms
- Usually one visit, start to finish
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing and guide to resurfacing and replacement costs.
Where we work around Sutton in the Elms
Sutton in the Elms is about 1 mile north-west of Broughton Astley, in Leicestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Sutton in the Elms is one of 287 towns and villages in Leicestershire we cover. You can also see our page for Birmingham, about 28 miles away.
Jobs in LE9 work the same way as everywhere else we cover. We regularly work on streets such as Sutton Lane, Warwick Road and Uppingham Drive. We also cover the places around Sutton in the Elms: Primethorpe (1 mile south-east), Broughton Astley (1 mile south-east), Croft (1 mile north), Potters Marston (2 miles north-west) and Sapcote (2 miles west). We also work in nearby towns such as Hinckley (6 miles west), Wigston (6 miles north-east), Coalville (14 miles north), Syston (13 miles north-east), Lutterworth (6 miles south) and Blaby (3 miles north-east).
Around Sutton in the Elms
We visit homes around Thomas Estley Community College, Orchard Church of England Primary School and Church of St Mary. Sutton in the Elms’s nearest station is Narborough station, roughly 2.6 miles north-east of the centre. Not far away are Croft Hill and Stoney Cove.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Give the bath a quick rinse after use
- Don’t scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Do you need bath repair in Sutton in the Elms?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
It’s worth getting a quote if you see:
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- A chipped rim or side
Questions to ask before booking
- How changes to the job are handled
- What preparation is included
- Whether the price covers travel
- When it can be used again
Nearby places to Sutton in the Elms
More services for Sutton in the Elms
Sutton in the Elms: your questions answered
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What happens if you find more damage?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
About our accreditations · Every repair comes with a one-year guarantee.
