Derbyshire · England

Bath Repair for Swadlincote homes

Fixed-price bath repair in Swadlincote and the surrounding area, generally in one visit and guaranteed for a year.

  • Repairs from £95
  • Chips on the rim or sides
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Swadlincote

Swadlincote and nearby

Swadlincote is about 10 miles south of Derby, in Derbyshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 532 places across Derbyshire. Our nearest city page is Birmingham, about 25 miles away.

Every address in DE11 and DE15 is covered. From Church Road, High Street and Main Street or a nearby road, a technician can come to you. Swadlincote sits on or near the A511 and A514, which makes travel easy. Other places close to Swadlincote include Upper Midway (1 mile north-east), Newhall (1 mile north-west), Midway (1 mile north-east), Lower Midway (1 mile north-east) and Church Gresley (1 mile south). We also work in nearby towns such as Long Eaton (14 miles north-east), Sandiacre (15 miles north-east), Hilton (7 miles north-west), Measham (6 miles south-east), Melbourne (7 miles north-east) and Chellaston (8 miles north-east). As one of the bigger places in Derbyshire, Swadlincote is somewhere we visit frequently.

Near you in Swadlincote

Typical jobs here are in homes near The Pingle School, Church of St John and The Sir Nigel Gresley pub and the streets around them. Other local landmarks include St Edward's Catholic Academy (less than half a mile north-east) and The Pingle School (less than half a mile north). Swadlincote’s nearest station is Burton-On-Trent station, about 3.8 miles north-west of the centre. Further afield, we also cover the area around Sharpe's Pottery Museum (within half a mile south-east) and Burton upon Trent Infirmary (3.5 miles north-west).

Map of Swadlincote © OpenStreetMap contributors

Bath repair at your home in Swadlincote

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Typical jobs include cracks in an acrylic bath and damage done while the bathroom was being fitted, in cast iron enamel, whirlpool & spa baths and acrylic.

Every repair is covered by our one-year guarantee, wherever you are in Derbyshire.

Location
Swadlincote (DE11, DE15)
Area hub
Derbyshire
Cover
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

FAQs for Swadlincote

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Will the price change on the day?

Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.

Which areas do you work in?

Across the UK. Prices do not change with location.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair a crack in an acrylic bath?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What we do, step by step

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the day after.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Ensure the room can be ventilated
  • Keep pets and children out of the room while we work

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Get a free quote

Read more

Why repair rather than replace?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • No need to remove anything
  • Free fixed quotes from pictures
  • Normally one visit, start to finish
  • No extra charge for your area

Read our full price list and resurfacing vs replacement cost guide.

Common problems we fix in Swadlincote

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

The most common problems we’re called about are:

  • Chips caused by builders
  • Hairline or through cracks in acrylic
  • Damage beneath the taps
  • A kit repair that didn’t last

What to look for in a quote

  • What happens if the damage is worse than the photos show
  • How the room is protected while they work
  • Aftercare advice
  • Whether the price covers travel

Choosing a repair company

How we price bath repair

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • Any earlier repairs that need removing first
  • What kind of damage it is
  • Whether we combine several jobs
  • Unusual colours or finishes

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what helps:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • One picture of the entire bath
  • A close-up of the damage, in focus

For a price in Swadlincote, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Have new chips seen to early
  • Store metal items away from the bath
  • Rinse the bath after use, especially in hard water areas
  • Avoid scourers, wire wool and gritty cream cleaners

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.