Derbyshire · England

Bath Repair in Upper Midway

Problem with your bath in Upper Midway? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Upper Midway?

When a repair isn’t the answer

We will not take on work that won’t last, so here’s what a repair cannot put right:

  • Rust that has eaten right through a steel bath
  • Leaking fittings, which need a plumber
  • Cracks in acrylic we cannot reach from underneath

Send us pictures and we will tell you honestly.

Materials we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

About our bath repair in Upper Midway

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s a cracked acrylic bath and scratches you can feel with a fingernail, we can help.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Upper Midway (DE11, DE15)
Region
Derbyshire
Warranty
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What we’re called out for in Upper Midway

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Send us a picture if you notice any of these:

  • Scratches you can feel with a fingernail
  • Snagging damage from a refit
  • A cracked acrylic bath
  • Chips on the rim or sides

What your quote should include

  • Whether the price covers travel
  • What preparation is included
  • When it can be used again
  • Who will actually do the work

Choosing a repair company

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Fix dripping taps early to stop staining and limescale
  • Rinse it down after each bath
  • If an acrylic bath flexes, have its feet adjusted
  • Keep metal cans and razors off the surface

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

Repair or replace in Upper Midway?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why Upper Midway customers choose us

  • Work done at your home or business
  • We’ll tell you if it’s not worth repairing
  • No extra charge for your area
  • Colour-matched on site

Take a look at our prices page or bath cost comparison.

Upper Midway questions

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

What happens after I send photos?

You get a fixed price and available dates. If we need another angle, we’ll ask.

Are there extra charges for Upper Midway?

No. Our quotes include travel, with the same prices everywhere we work.

Do the materials smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

What about rust by the waste?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Will the repair show?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

How the visit works

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, including clearing up.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

How to get a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.

Send photos for a quote

Related advice

Upper Midway and nearby

Upper Midway is about 1 mile north-east of Swadlincote, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Upper Midway is one of 532 places in Derbyshire where we work. You can also see our page for Birmingham, about 26 miles away.

We cover every part of DE11 and DE15. That includes homes on Vale Road, Kings Road and Maple Road. With the A511 close by, Upper Midway is easy for our repair technicians to reach. We also travel to Midway (1 mile south-east), Lower Midway (1 mile south-east), Swadlincote (1 mile south-west), Newhall (1 mile west) and Stanhope Bretby (1 mile north-west). Within a short drive, we also cover Long Eaton (14 miles north-east), Sandiacre (15 miles north-east), Hilton (7 miles north-west), Measham (6 miles south), Melbourne (6 miles north-east) and Chellaston (8 miles north-east).

Around Upper Midway

We visit homes around Chesterfield Arms, The Pingle School and Church of St John, among other places. Also close by are The Pingle School (0.6 miles south-west) and Elmsleigh Infant and Nursery School (within half a mile south). The closest station to Upper Midway is Burton-On-Trent station, roughly 3.8 miles west of the centre. Further afield, we also cover the area around Bretby Castle (1.4 miles north) and Sharpe's Pottery Museum (0.8 miles south).

Map of Upper Midway © OpenStreetMap contributors

How we price bath repair

Prices start from £95. A fixed quote means you know the cost before you book. We take into account:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • The material

Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Getting a price from pictures

You can usually get a fixed quote without us visiting. To make it quick:

  • Any details about the material
  • A close-up of the damage, in focus
  • Where you are, by postcode
  • Whether it’s been repaired or coated before

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.