Milton Keynes · England

Bath chip & crack repair in Tattenhoe, Milton Keynes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Tattenhoe. Send photos for a free, fixed quote.

  • Repairs from £95
  • Deep scratches in acrylic
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Tattenhoe?

Aftercare tips

Once the work has cured, treat it gently:

  • Rinse the bath after use, especially in hard water areas
  • Have new chips seen to early
  • Put a towel in the bath if you’re working above it
  • Keep metal cans and razors off the surface

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Bath repair at your home in Tattenhoe

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our repair technicians work on acrylic, pressed steel enamel and cast iron enamel, and people most often call us about a failed DIY repair that’s discoloured or lifting and a hole punched through by something heavy.

You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Rusty chip next to a bath plughole, before and after repair
Location
Tattenhoe (MK4)
County
Milton Keynes
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What happens on the day

On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a few hours, including clearing up.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Let us know about parking or access
  • Ensure the area is dry

Ask for a price

Send us pictures of the damage and a wider shot of the whole item, with your MK4 postcode, and we will come back with a fixed quote.

Send pictures for a quote

Related advice

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

Honest limits

In fairness, there are a few things a repair won’t fix:

  • Wear across the whole surface, which needs re-enamelling
  • Cracks in acrylic we can’t reach from underneath
  • Metal that has corroded all the way through

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Tattenhoe

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

What we are called out for in Tattenhoe

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

The things clients typically mention when they call are:

  • A cracked acrylic bath
  • Impact holes in acrylic
  • Snagging damage from a refit
  • Chips along the edge of the bath

What your quote should include

  • How the colour is matched
  • How your room will be protected
  • Whether there are any call-out or travel charges
  • What preparation is included

10 questions to ask before you book

Repair or replace: which is better?

Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Fixed prices from your photos
  • Colours mixed by hand to suit your surface
  • Same prices wherever you are
  • One visit for most repairs

See our pricing or guide to resurfacing and replacement costs.

Covering Tattenhoe

Tattenhoe is about 1 mile south-west of Furzton, in Milton Keynes. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Tattenhoe is one of 73 places in Milton Keynes where we work. You can also see our page for London, about 45 miles away.

Postcode districts we cover here: MK4. From Gunver Lane, Hartland Avenue and Hengistbury Lane or a nearby road, we can come to you. We also cover the places around Tattenhoe: Newton Longville (2 miles south-east), Bletchley (2 miles east), Bletchley and Fenny Stratford (3 miles east), Newton Leys (3 miles south-east) and Salden (3 miles south). Larger places within reach include Milton Keynes (3 miles north), Newport Pagnell (7 miles north-east), Whitehouse (3 miles north-west), Middleton (5 miles north-east), Fenny Stratford (3 miles east) and Olney (12 miles north).

Around Tattenhoe

Around Tattenhoe, we work in homes near Shenley Brook End School, St Giles's Church and Giles Brook Primary School, among other places. Tattenhoe’s nearest station is Bletchley station, about 2.3 miles east of the centre. Other landmarks nearby include Hangmans Hill (2.2 miles south) and The Holley/Cornelius Collection (2 miles east). Green spaces nearby include Furzton Lake and Blue Lagoon Park.

Map of Tattenhoe © OpenStreetMap contributors

What affects the price in Tattenhoe

Repairs from £95. You’ll know the full cost before you book. We look at:

  • Any earlier repairs that need removing first
  • What kind of damage it is
  • The material
  • Where the damage is and how we get to it

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

How to get a fixed quote

Photographing the damage takes a minute. Please include:

  • The postcode, so we can plan the visit
  • Details of any past repairs
  • Any details about the material
  • Daylight if possible, and no flash reflection

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Tattenhoe questions

How long does the repair take to cure?

Most baths can be used the day after. We confirm the time before we leave.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Can you repair a hole in a bath?

Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Do you come to Tattenhoe?

Yes. We cover the whole UK and travel to Tattenhoe. Send us photos for a fixed quote, or call 0345 017 0787.

Is repairing better than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

What areas do you cover?

Across the UK, so Tattenhoe is covered. Prices do not change with location.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.