Somerset · England
Bath Repair in Thorncombe
Local bath repair for Thorncombe: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chipped rim or side
- Holes from dropped items
Bath repair in Thorncombe without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Whether it’s chips along the edge of the bath and damage done while the bathroom was being fitted, we can typically put it right, on roll-top & freestanding, pressed steel enamel and cast iron enamel alike.
Whatever the size of the job, you get the same one-year guarantee in Thorncombe and across Somerset.
- Location
- Thorncombe (TA20)
- Region
- Somerset
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
About Thorncombe
Thorncombe is about 5 miles south-east of Chard, in Somerset. Across the TA20 area, we carry out the work at your property. We cover all 640 towns and villages across Somerset.
Jobs in TA20 work the same way as everywhere else we cover. Whether you live on High Street, Chard Street and Fore Street or anywhere nearby, a technician can come to you. If you are just outside Thorncombe, we cover Blackdown (1 mile east), Winsham (2 miles north), Greenham (2 miles north-east), Netherhay (3 miles north-east) and Drimpton (3 miles north-east). Further out, we also cover Yeovil (14 miles north-east), Chard (5 miles north-west), Crewkerne (6 miles north-east), Ilminster (7 miles north), Preston Plucknett (13 miles north-east) and Martock (11 miles north-east).
Local landmarks in Thorncombe
Our customers here include homes close to Parish Church of St Mary. A little further out are Chard Community Hospital (4.4 miles north-west) and Marshwood Castle (3.9 miles south-east). The countryside around Thorncombe includes Payne's Down.
Repair or replace: which is better?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Thorncombe. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Thorncombe
- No extra charge for your area
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
Read our pricing and resurfacing vs replacement cost guide.
Landlord and trade work in Thorncombe
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What affects the price in Thorncombe
Repairs from £95. Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Common problems we fix in Thorncombe
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
If you can see any of these, send us a photo:
- Scuffs and scratches in the surface
- A hole punched through by something heavy
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
What to look for in a quote
- How the room is protected while they work
- What aftercare is recommended
- How long it needs to cure
- Whether they match the colour on site
When we would advise against a repair
We won’t take on work that will not last, so these are the limits:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Thorncombe
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
FAQs for Thorncombe
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do you cover Thorncombe?
We do. Technicians travel to Thorncombe from across the region, and the price is the same as everywhere else.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What areas do you cover?
We cover the whole UK, including Thorncombe and the rest of Somerset. Just include your postcode and we’ll confirm dates.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
More services for Thorncombe
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
