Essex · England
Bath Repair for Thorpe Cross homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Thorpe Cross, carried out at your home and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- A hole punched through by something heavy
About Thorpe Cross
Thorpe Cross is about 4 miles north-east of Clacton-on-Sea, in Essex. Whether you are in the middle of Thorpe Cross or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Thorpe Cross is one of 644 places in Essex we cover. We work right across the region, from Thorpe Cross to London (about 60 miles away).
Every address in CO16 is covered. That includes homes on Damant's Farm Lane and Frinton Road. Other places close to Thorpe Cross include Thorpe-le-Soken (1 mile north-west), Pig Street (1 mile south-west), Thorpe Green (2 miles north-west), Far Thorpe Green (2 miles west) and Beaumont (2 miles north-west). Further out, we also cover Colchester (13 miles west), Clacton-on-Sea (4 miles south-west), Harwich (6 miles north-east), Camulodunum (14 miles west), Greenstead (11 miles west) and Wivenhoe (10 miles west).
What’s near Thorpe Cross
In Thorpe Cross, that means homes near Parish Church of St Michael and Rolph CofE Primary School. Thorpe Cross’s nearest station is Thorpe-Le-Soken station, about 1.2 miles west of the centre. For a walk, there’s Great Holland Pits.
Bath repair at your home in Thorpe Cross
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because the bath doesn’t move. Our technicians work on pressed steel enamel, acrylic and whirlpool & spa baths, and people most often call us about chips along the edge of the bath and chips under the taps.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Thorpe Cross (CO16)
- Region
- Essex
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Places near Thorpe Cross
More services for Thorpe Cross
What affects the price in Thorpe Cross
Prices start from £95. There’s no area surcharge for Thorpe Cross. The price reflects:
- How hard the colour is to match
- What the surface is made of
- Doing more than one item at once
- Previous DIY repairs that have to come out
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
You can usually get a fixed price without us visiting. To help us price it:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- A picture taken from further back
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Signs you need bath repair in Thorpe Cross
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Typical reasons for a call-out include:
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
- Chips caused by builders
- Holes from dropped items
Before booking anyone
- What aftercare is recommended
- Whether the price covers travel
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
How to prepare
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Thorpe Cross: your questions answered
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
When we’d advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly before you book.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
