Swansea · Wales
Bath Repair for Three Crosses homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Three Crosses and across Swansea. Free, fixed quotes from your photos.
- Repairs from £95
- Rusty patches near the plughole
- Chips under the taps
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we handle bath repair in Three Crosses
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you are dealing with a cracked acrylic bath and scuffs and scratches in the surface, we can typically put it right, on pressed steel enamel, acrylic and roll-top & freestanding alike.
Every repair comes with our one-year guarantee, wherever you are in Swansea.
- Location
- Three Crosses (SA4)
- Region
- Swansea
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Three Crosses: your questions answered
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Swansea.
How long before I can use the bath?
Normally by the following day, depending on the repair.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Common problems we fix in Three Crosses
A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
The most common problems we’re called about are:
- Rust spots around the plughole
- Chips under the taps
- A chipped rim or side
- Scuffs and scratches in the surface
What to look for in a quote
- If travel is included in the price
- What aftercare is recommended
- What preparation is included
- The length of the guarantee and what it covers
Our work in Three Crosses
Three Crosses is about 3 miles south of Gorseinon, in Swansea. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover 153 places across Swansea.
Here we cover the SA4 postcode area. You will find streets such as Pant y Dwr, Cae Ty Cwrdd and Maes-y-Celyn, and we cover them all. We also cover the places around Three Crosses: Poundffald (1 mile north-west), Wern-olau (1 mile north), Wernbwll (1 mile west), Dunvant (1 mile east) and Blue Anchor (1 mile north-west). Larger places within reach include Swansea (5 miles east), Castle (5 miles east), Morriston (7 miles north-east), Mount Pleasant (5 miles east), Gorseinon (3 miles north) and Dyfaty (5 miles east).
Local landmarks in Three Crosses
Typical jobs here are in homes near Gowerton School, Crwys Primary School and Joiners Arms. Three Crosses’s nearest station is Gowerton station, roughly 2 miles north-east. Further afield, we also cover the area around Bwlch Farm Museum (3.2 miles north-west) and Gowerton Castle (1.9 miles north). Not far away are Broad Pool and Three Crosses Hill.
Places near Three Crosses
Also in Three Crosses
Aftercare tips
After the repair has cured, a few habits help it last:
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Three Crosses as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- The colour and finish to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- A picture taken from further back
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
How it works
Arrival times are agreed in advance. Once we are there, the work takes a few hours, depending on the damage. We leave the room clean and you will know when it can be used.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Before we arrive
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Advice
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What a repair can’t fix
A repair isn’t right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
