Middlesbrough · England
Bath Repair for Tilery homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Tilery and across Middlesbrough. Free, fixed quotes from your photos.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
About our bath repair in Tilery
A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. We’re frequently asked to fix rust by the waste and overflow and hairline or through cracks in acrylic, in roll-top & freestanding, acrylic and whirlpool & spa baths.
You get a one-year guarantee, the same in Tilery as everywhere else we work.
- Location
- Tilery (TS18, TS19, TS20)
- Region
- Middlesbrough
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Tilery?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Tilery
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
- Everything repaired in place
See our full price list or resurfacing vs replacement cost guide.
When we would advise against a repair
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Tilery
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
The process
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Make sure the area is dry
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately whether it can be repaired.
Advice
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Covering Tilery
Tilery is about 1 mile east of Stockton-on-Tees, in Middlesbrough. Whether you are in the middle of Tilery or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Tilery is one of 33 places in Middlesbrough we cover. You can also see our page for Newcastle upon Tyne, about 32 miles away.
We work across the TS18, TS19 and TS20 postcode area. Whether you live on Bath Lane, Ross Road and The Square or a nearby road, we can come to you. Tilery is on the A139, which makes it straightforward to reach. We also travel to Portrack (1 mile south-east), Mount Pleasant (1 mile north), Newtown (1 mile west), Stockton-on-Tees (1 mile west) and Norton (1 mile north). We also work in nearby towns such as Middlesbrough (4 miles south-east), Park End (5 miles east), Berwick Hills (4 miles east), Whale Hill (7 miles east), Normanby (6 miles east) and Brookfield (4 miles south-east).
Local landmarks in Tilery
Typical jobs here are in homes near Tilery Primary School, Trinity Green and Church of St Mary, among other places. Other local landmarks include Red House School (1.4 miles north), Riverside Inn (0.6 miles south) and North Shore Academy (0.6 miles north-east). Tilery’s nearest station is Stockton station, about 0.5 miles south-west of the centre. A little further out are University Hospital of North Tees (1.8 miles west) and Green Dragon Museum (0.7 miles south). Open spaces near Tilery include RSPB Salthome.
Tilery questions
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
What areas do you cover?
All of Middlesbrough, and the rest of the UK. There’s no extra charge for travel.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What we’re called out for in Tilery
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Keep an eye out for any of the following:
- A chip where the taps sit
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Scuffs and scratches in the surface
What to look for in a quote
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- Who will actually do the work
Landlords, agents and businesses in Tilery
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Keeping it looking good
So the finish stays in good condition:
- Have new chips seen to early
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
- Don’t leave razors or cans standing in the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Also near Tilery
What else we do in Tilery
About our accreditations · Every repair comes with a one-year guarantee.
