Middlesbrough · England

Bath chip & crack repair in Oxbridge, Middlesbrough

Our technicians come to Oxbridge for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Oxbridge?

Signs you need bath repair in Oxbridge

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.

It’s worth getting a quote if you see:

  • A failed DIY repair that’s discoloured or lifting
  • Chips caused by builders
  • Rusty patches near the plughole
  • Scuffs and scratches in the surface

Comparing quotes

  • Who will actually do the work
  • How your room will be protected
  • How long it needs to cure
  • What aftercare is recommended

How to compare quotes

Bath repair in Oxbridge, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include chips caused by builders and chips along the edge of the bath, on cast iron enamel, acrylic and pressed steel enamel.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Area
Oxbridge (TS18, TS19)
Area hub
Middlesbrough
Cover
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Common questions in Oxbridge

What happens next?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Do I need to be at home?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Do you cover the entire of Middlesbrough?

Across the UK, so Oxbridge is covered. Our prices are the same everywhere.

How long before I can use the bath?

Normally by the following day, depending on the repair.

How do I book?

Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.

How do I get a price for bath repair in Oxbridge?

Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

What a repair cannot fix

A repair isn’t right for every job, including:

  • A bath worn all over, where resurfacing makes more sense
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Metal that has corroded all the way through

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Rinse it down after each bath
  • Cover the bath during DIY or decorating
  • Check that an acrylic bath does not move when you stand in it

There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

What we do, step by step

Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the day after.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Get a free quote

Read more

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Covering Oxbridge

Oxbridge is about 1 mile south of Stockton-on-Tees, in Middlesbrough. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We work in all 33 towns and villages in Middlesbrough, from the larger towns to small villages. We work right across the region, from Oxbridge to Newcastle upon Tyne (32 miles away).

Jobs in TS18 and TS19 are booked in the same way as anywhere else. You will find streets such as Yarm Lane, Crayke Road and Gray's Road, all of which we cover. If you’re just outside Oxbridge, we cover Hartburn (1 mile south-west), Bowesfield (1 mile south), Newtown (1 mile north-east), Stockton-on-Tees (1 mile north) and Fairfield (1 mile north-west). We also work in nearby towns such as Middlesbrough (5 miles east), Park End (5 miles east), Berwick Hills (5 miles east), Whale Hill (8 miles east), Normanby (7 miles east) and Brookfield (4 miles south-east).

Local landmarks in Oxbridge

Our clients here include homes close to The Green Dragon Inn, Trinity Green and The Grangefield Academy. Other local landmarks include St Peter's Church (within half a mile south-east), The Grangefield Academy (0.6 miles north-west) and Oxbridge Lane Primary School (under half a mile east). Oxbridge’s nearest station is Stockton station, roughly 0.8 miles north-east of the centre. Further afield, we also cover the area around Green Dragon Museum (0.8 miles east) and University Hospital of North Tees (1.6 miles north-west).

Map of Oxbridge © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. We price every job individually, from your photos. The main factors are:

  • Where the damage is and how we get to it
  • What the surface is made of
  • How many areas need work
  • Whether we combine several jobs

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Send photos for a quote

Two or three clear photos are usually enough. It helps if you send:

  • Details of any past repairs
  • A wider photo showing the entire bath
  • A close-up of the damage, in focus
  • The material, if you know it

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Landlord and trade work in Oxbridge

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.