Coventry · England

Bath Repair for Toll Bar End homes

Fixed-price bath repair in Toll Bar End and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • Chips on the rim or sides
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Toll Bar End?

Repairing versus replacing in Toll Bar End

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Toll Bar End

  • No need to remove anything
  • Colours mixed by hand to suit your surface
  • Straight answers about what a repair can do
  • One visit for most repairs

Take a look at our full price list and resurfacing vs replacement cost guide.

Bath repair in Toll Bar End, done in place

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Our technicians work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are hairline or through cracks in acrylic and scuffs and scratches in the surface.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Where
Toll Bar End (CV3, CV1, CV4)
Area hub
Coventry
Guarantee
One year on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

About Toll Bar End

Toll Bar End is about 3 miles south-east of Coventry, in Coventry. Anywhere in CV3, a technician comes to you. Toll Bar End is one of 88 places in Coventry where we work. Our nearest city page is Birmingham, about 19 miles away.

Our repair technicians cover all of the CV3, CV1 and CV4 postcode area. From Sibree Road, Brandon Lane and Chace Avenue or a nearby road, a technician can come to you. Other places close to Toll Bar End include Willenhall (1 mile north), Ernesford Grange (1 mile north), Stoke Aldermoor (1 mile north), Baginton (1 mile south-west) and Binley (1 mile north-east). We also work in nearby towns such as Coventry (3 miles north-west), Hillfields (3 miles north-west), Bishopsgate Green (3 miles north-west), Radford (3 miles north-west), Foleshill (4 miles north) and Wood End (4 miles north).

Local landmarks in Toll Bar End

Around Toll Bar End, we work in homes near Whitley Academy, Stretton Church of England Academy and Church of St John the Divine, among other places. The closest station to Toll Bar End is Coventry station, about 2.5 miles north-west of the centre. Nearby you will also find Aircraft Radio Museum (0.9 miles south) and Baginton Castle (1.5 miles south-west). The countryside around Toll Bar End includes Brandon Marsh.

Map of Toll Bar End © OpenStreetMap contributors

When we would advise against a repair

It helps to know what we cannot do:

  • A bath that moves underfoot, until its support is fixed
  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

How the visit works

We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and we leave the room as we found it.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Have a window or extractor fan available
  • Plan for the room to be out of bounds to pets and children
  • Tell us about parking, stairs or access

How to get a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a free quote

Read more

Common problems we fix in Toll Bar End

Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.

Look out for these signs:

  • Chips caused by builders
  • A chip where the taps sit
  • Impact holes in acrylic
  • Scuffs and scratches in the surface

Comparing quotes

  • What prep work is covered
  • How the colour is matched
  • What happens if the damage is worse than the pictures show
  • How soon you can use it again

Choosing a repair company

Your questions about bath repair in Toll Bar End

Can you repair a crack in an acrylic bath?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Something went through my bath. Can it be fixed?

Usually. Photos of the hole and the underside help us check.

Can you fix rust around the plughole?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Will there be a smell?

Expect a mild smell while we’re working, which fades afterwards.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Rinse the bath after use, especially in hard water areas
  • Clean with warm water and a mild detergent
  • Keep abrasive pads and gritty cleaners away from the bath
  • A dripping tap stains enamel, so fix it early

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.

What affects the price in Toll Bar End

Repairs from £95. There is no charge for travel to Toll Bar End. The price depends on:

  • The colour and finish to match
  • The material and finish
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach

Our prices are the same across the UK, with no extra for Toll Bar End. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from photos

It only takes a minute to photograph the damage. Please include:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Any earlier repairs or coatings

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.