Powys · Wales
Bath Repair in Trefeglwys
Chip and crack repairs to enamel, acrylic and cast iron baths in Trefeglwys, carried out at your home and guaranteed for a year.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
Trefeglwys and nearby
Trefeglwys is about 9 miles west of Y Drenewydd, in Powys. Jobs in Trefeglwys are booked in like any other job: a fixed price from your photos, then a visit to do the work. Trefeglwys is one of 234 places in Powys we cover. We work right across the region, from Trefeglwys to Liverpool (67 miles away).
Jobs in SY17 are booked in the same way as anywhere else. From Plas Trannon, Maes Llwyncelyn and Maes Trannon or a nearby road, we can come to you. We also travel to Y Fan (2 miles south-west), Clatter (3 miles north-east), Gwerneirin (3 miles east), Broneiron (4 miles east) and Carno (4 miles north). Within a short drive, we also cover Y Drenewydd (9 miles east), Newtown and Llanllwchaiarn (9 miles east), Penygloddfa (9 miles east), Pen-y-Glodfa (9 miles east), Machynlleth (15 miles north-west) and Bryn (8 miles east).
Near you in Trefeglwys
Typical jobs here are in homes near Red Lion pub and Church of St Michael. Trefeglwys’s nearest station is Caersws station, roughly 3.8 miles east. Further afield, we also cover the area around Close Bank Enclosure (2 miles east) and Llanidloes Museum (3.9 miles south). The countryside around Trefeglwys includes Bryn Crugog and Llyn Ebyr.
How we handle bath repair in Trefeglwys
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. Typical jobs include a cracked acrylic bath and a failed DIY repair that’s discoloured or lifting, across cast iron enamel, acrylic and pressed steel enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Trefeglwys (SY17)
- County
- Powys
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Trefeglwys
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you cover the whole of Powys?
We cover the whole UK, including Trefeglwys and the rest of Powys. Just include your postcode and we will confirm dates.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Ensure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, depending on the damage, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Open a window if you can
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- Colour mixed on the day to match
- No extra charge for your area
- Most jobs done in one visit
- Everything repaired in place
Read our prices page or bath cost comparison.
Landlord and trade work in Trefeglwys
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs in Powys and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Trefeglwys
Also in Trefeglwys
When to call us in Trefeglwys
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Most people get in touch after spotting one of these:
- Chips along the edge of the bath
- Scuffs and scratches in the surface
- Rust spots around the plughole
- Chips under the taps
What to look for in a quote
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- The length of the guarantee and what it covers
What we can’t put right
A repair isn’t always the answer, and we’d rather say so up front. Repairs will not solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the whole surface, which needs re-enamelling
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
