Powys · Wales
Bath Repair for Clatter homes
Problem with your bath in Clatter? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Deep scratches in acrylic
About our bath repair in Clatter
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We regularly repair whirlpool & spa baths, roll-top & freestanding and acrylic, and people most often call us about chips under the taps and a kit repair that didn’t last.
Big or small, it’s backed by a one-year guarantee in Clatter and across Powys.
- Area
- Clatter (SY17)
- Region
- Powys
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Clatter
Clatter is about 7 miles west of Y Drenewydd, in Powys. Anywhere in SY17, a technician comes to you. Our repair technicians cover all 234 towns and villages across Powys, from the larger towns to small villages. You can also see our page for Liverpool, about 64 miles away.
Jobs in SY17 work the same way as everywhere else we cover. We also cover the places around Clatter: Llanwnog (2 miles east), Carno (3 miles north-west), Caersws (3 miles south-east), Trefeglwys (3 miles south-west) and Maesmawr (3 miles south-east). We also work in nearby towns such as Y Drenewydd (7 miles east), Newtown and Llanllwchaiarn (7 miles east), Llanidloes (7 miles south), Penygloddfa (7 miles east), Pen-y-Glodfa (7 miles east) and Bryn (7 miles east).
Near you in Clatter
The nearest railway station is Caersws station, roughly 2.6 miles south-east. Well-known places in the area include Gaer Noddfa (2.5 miles north-west). For a walk, there’s Llyn Mawr and Graigorddle.
Nearby places to Clatter
What else we do in Clatter
How the visit works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for two to three hours for most chips from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Ask for a price
Send us a photo of the damage and a wider shot of the entire item, with your SY17 postcode, and we’ll reply with a fixed quote.
Related advice
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Common problems we fix in Clatter
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Typical reasons for a call-out include:
- Chips on the rim or sides
- Impact holes in acrylic
- Deep scratches in acrylic
- Rusty patches near the plughole
Questions to ask before booking
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- Aftercare advice
- How long it needs to cure
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Check that an acrylic bath does not move when you stand in it
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Get a dripping tap fixed promptly
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
What affects the price in Clatter
Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The size and number of damaged areas
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send pictures for a quote
You can take the pictures on your phone. Ensure they show:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Our bath repair starts from £95. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Clatter
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- One price list for the whole UK
- Every repair guaranteed for a year
See our prices page or resurfacing vs replacement cost guide.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Common questions in Clatter
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Clatter.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Is there any odour?
There may be a mild smell during the work.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
