Pembrokeshire · Wales
Bath Repair for Treffgarne homes
Local bath repair for Treffgarne: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Holes from dropped items
Questions from Treffgarne
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
What happens after I send photos?
We come back with a fixed price, usually with dates to choose from. You are under no obligation.
Is a cracked acrylic bath repairable?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
How do I get a price for bath repair in Treffgarne?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Pembrokeshire.
Bath repair in Treffgarne without replacing anything
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We’re frequently asked to fix chips under the taps and impact holes in acrylic, in acrylic, pressed steel enamel and cast iron enamel.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Treffgarne (SA62)
- Region
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Treffgarne
More services for Treffgarne
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
When to call us in Treffgarne
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Most people contact us when they notice one of these:
- Chips caused by builders
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
- Impact holes in acrylic
What your quote should include
- When it can be used again
- How the colour is matched
- What preparation is included
- What happens if they find more damage
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before you book.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Put a towel in the bath if you’re working above it
- Have new chips seen to early
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Landlords, agents and businesses in Treffgarne
We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Where we work around Treffgarne
Treffgarne is about 5 miles north of Haverfordwest, in Pembrokeshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Treffgarne is one of 223 places in Pembrokeshire where we work.
Postcode districts we cover here: SA62. Neighbouring places we cover include Leweston (1 mile south-west), Golden Hill (1 mile east), Spittal (1 mile east), Wolf's Castle (2 miles north) and Withybush (3 miles south). Further out, we also cover Haverfordwest (5 miles south), Milford Haven (11 miles south), Pembroke (14 miles south), Pembroke Dock (13 miles south), The Marsh (5 miles south) and Fishguard (8 miles north).
Near you in Treffgarne
Typical jobs here are in homes near Church of St Michael and Spittal V.C.P. School, among other places. The nearest railway station is Clarbeston Road station, about 4 miles east of the centre. A little further out are Wolfscastle Motte (1.8 miles north) and Withybush General Hospital (4.2 miles south). The countryside around Treffgarne includes Great Treffgarne Mountain.
Prices and what affects them
Prices start from £95. Prices are worked out job by job. The main factors are:
- The type of damage
- Doing more than one item at once
- Where the damage is and how we get to it
- Unusual colours or finishes
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Any details about the material
For a price in Treffgarne, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, depending on the damage.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the next day, the bath is ready to use.
Before we arrive
- Let us know if it has been repaired before
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
