Aberdeenshire · Scotland
Bath Repair in Tullynessle
Problem with your bath in Tullynessle? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- Damage beneath the taps
Bath repair in Tullynessle without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We are often asked to fix a chipped rim or side and scratches you can feel with a fingernail, in whirlpool & spa baths, acrylic and pressed steel enamel.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Where
- Tullynessle (AB33)
- Area hub
- Aberdeenshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Have new chips seen to early
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath does not move when you stand in it
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a few hours. Before leaving, we tell you when it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Ensure the area is dry
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
Get a quote
Send us photos of the damage and a wider shot of the whole item, with your AB33 postcode, and we will come back with a fixed quote.
Read more
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- No need to remove anything
- No extra charge for your area
- A year’s guarantee on all work
- Honest advice, even when it means no job
Read our prices page or resurfacing vs replacement cost guide.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Nearby places to Tullynessle
What else we do in Tullynessle
About Tullynessle
Tullynessle is about 13 miles west of Inverurie, in Aberdeenshire. Jobs in Tullynessle are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Tullynessle is one of 161 towns and villages in Aberdeenshire where we work.
We work across AB33. We also travel to Bridge of Alford (1 mile south-east), Forbes (1 mile south), Alford (2 miles south-east), Auchleven (5 miles north-east) and Lumsden (5 miles west). Within a short drive, we also cover Inverurie (13 miles east), Huntly (13 miles north), Garioch (13 miles east), Kemnay (11 miles east), Kintore (14 miles east) and Aboyne (13 miles south).
What’s near Tullynessle
In Tullynessle, that means homes near Tullynessle and Forbes Parish Church and Alford Academy, among other places. A little further out are Asloun Castle (3 miles south) and Grampian Transport Museum (2.4 miles south-east). Open spaces near Tullynessle include Coiliochbar Hill.
Common questions in Tullynessle
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we take into account:
- What kind of damage it is
- Doing more than one item at once
- Unusual colours or finishes
- How easy the damage is to reach
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath repair in Tullynessle?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
People generally call us when they notice one of these:
- Damage beneath the taps
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Holes from dropped items
Questions to ask before booking
- Whether they match the colour on site
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- What prep work is covered
What a repair can’t fix
A repair isn’t right for every job, for example:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
