Devon · England
Bath Repair in Two Mile Oak Cross
Problem with your bath in Two Mile Oak Cross? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- Rust spots around the plughole
How we handle bath repair in Two Mile Oak Cross
A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. We work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are impact holes in acrylic and chips along the edge of the bath.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Two Mile Oak Cross (TQ12)
- Region
- Devon
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Most damage we see is avoidable. These habits help:
- Put a towel in the bath if you are working above it
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- Get any new chip repaired before it rusts
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Signs you need bath repair in Two Mile Oak Cross
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Most people get in touch when they notice one of these:
- Chips along the edge of the bath
- Rust spots around the plughole
- Snagging damage from a refit
- Hairline or through cracks in acrylic
What your quote should include
- How the colour is matched
- Whether there are any call-out or travel charges
- How long it needs to cure
- What happens if the damage is worse than the pictures show
Two Mile Oak Cross and nearby
Two Mile Oak Cross is about 2 miles south of Newton Abbot, in Devon. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 586 places in Devon, from the larger towns to small villages.
Jobs in TQ12 are booked in the same way as anywhere else. Other places close to Two Mile Oak Cross include Abbotskerswell (1 mile north-east), East Ogwell (1 mile north), Denbury (2 miles west), Wolborough (2 miles north) and Newton Abbot (2 miles north). Further out, we also cover Exmouth (13 miles north-east), Teignmouth (7 miles north-east), Kingsteignton (4 miles north-east), Ivybridge (15 miles south-west), Dawlish (9 miles north-east) and St Thomas (15 miles north).
Around Two Mile Oak Cross
Locally, our jobs take us to homes close to Newton Abbot College, Abbotskerswell Primary School and Church of St Mary, among other places. The nearest railway station is Newton Abbot station, about 2.4 miles north-east. Other landmarks nearby include Newton Abbot Museum (2 miles north) and Berry Pomeroy Castle (3.6 miles south). Open spaces near Two Mile Oak Cross include Orley Common.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow two to three hours for most chips from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
Places near Two Mile Oak Cross
What else we do in Two Mile Oak Cross
Two Mile Oak Cross: your questions answered
When can I have a bath again?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
What affects the price in Two Mile Oak Cross
Prices start from £95. We price every job individually. What matters most is:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How easy the damage is to reach
- What the surface is made of
We charge the same wherever you are, so there is no premium for Two Mile Oak Cross. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
You can take the pictures on your phone. Just make sure we can see:
- One sharp close-up of the damage
- A photo taken from further back
- Natural light rather than flash
- The postcode, so we can plan the visit
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
When a repair isn’t the answer
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think before booking.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
