Herefordshire · England
Bath Repair for Upper Breinton homes
Bath repair for Upper Breinton, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Holes from dropped items
Bath repair in Upper Breinton, done in place
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you are dealing with chips along the edge of the bath and hairline or through cracks in acrylic, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Upper Breinton (HR4)
- Region
- Herefordshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- Ensure an acrylic bath is firm underfoot
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Where we work around Upper Breinton
Upper Breinton is about 3 miles west of Hereford, in Herefordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 255 towns and villages across Herefordshire, from the larger towns to small villages. We work right across the region, from Upper Breinton to Birmingham (about 47 miles away).
We work across HR4. From Breinton Lane and Green Lane or anywhere nearby, we can come to you. We also travel to Swainshill (1 mile north-east), King's Acre (1 mile north-east), Stretton Sugwas (1 mile north), Huntington (1 mile north-east) and Bobblestock (2 miles north-east). Within a short drive, we also cover Hereford (3 miles east), Ross-on-Wye (13 miles south-east), Ledbury (15 miles east), Leominster (11 miles north), Redhill (3 miles south-east) and Newton Farm (3 miles south-east).
Landmarks near Upper Breinton
Locally, our jobs take us to homes close to Church of St Mary Magdalene, Whitecross Hereford and Stretton Sugwas CofE Academy and the streets around them. The closest station to Upper Breinton is Hereford station, about 3.1 miles east of the centre. Nearby you will also find Waterworks Museum - Hereford (2.2 miles south-east) and St. Mary's Hospital (2 miles north-east). For a walk, there’s Merryhill and Wyevale Wood.
Common problems we fix in Upper Breinton
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Upper Breinton contact us are:
- Snagging damage from a refit
- Scuffs and scratches in the surface
- A chip where the taps sit
- Rust by the waste and overflow
What your quote should include
- Whether cleaning and preparation are in the price
- Who turns up on the day
- How the room is protected while they work
- Whether they match the colour on site
What affects the price in Upper Breinton
Prices start from £95. Every quote is fixed and free. What we take into account:
- What the surface is made of
- How much damage there is
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Where you are, by postcode
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- The material, if you know it
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
FAQs for Upper Breinton
Can a cracked acrylic bath be fixed?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
When can I have a bath again?
Generally within a day, depending on the repair.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Getting a price
Upload a photo of the damage and one of the entire item, with your HR4 postcode, and we will reply with a fixed quote.
Advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Upper Breinton
More services for Upper Breinton
About our accreditations · Every repair comes with a one-year guarantee.
