Staffordshire · England
Bath Repair for Upper Longdon homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Upper Longdon and across Staffordshire. Free, fixed quotes from your photos.
- Repairs from £95
- A hole punched through by something heavy
- A cracked acrylic bath
Bath repair in Upper Longdon without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s a kit repair that didn’t last and rusty patches near the plughole, we can help, on cast iron enamel, whirlpool & spa baths and acrylic alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Upper Longdon (WS15)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Upper Longdon
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Should you replace it?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- Fixed prices from your photos
- CHAS and Constructionline accredited
- No need to remove anything
Read our prices page or bath cost comparison.
Towns and villages near Upper Longdon
Other services in Upper Longdon
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
- Keep metal cans and razors off the surface
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
Upper Longdon and the surrounding area
Upper Longdon is about 2 miles south-east of Rugeley, in Staffordshire. Our repair technicians come to homes and businesses in Upper Longdon and nearby villages, so you don’t need to take anything anywhere. Upper Longdon is one of 512 places in Staffordshire where we work. Our jobs stretch from Upper Longdon to Birmingham (about 18 miles away).
We work across the WS15 postcode area. We regularly work on streets such as The Grange, Grange Hill and Lower Way and the roads around them. We also travel to Brereton Cross (1 mile north-east), Breretonhill (1 mile north), Brereton (1 mile north-west), Windmill Bank (1 mile south) and Cold Well (2 miles south). Within a short drive, we also cover Stafford (10 miles north-west), Burton upon Trent (13 miles north-east), Tamworth (12 miles south-east), Cannock (5 miles south-west), Lichfield (5 miles south-east) and Burntwood (3 miles south).
What’s near Upper Longdon
Our clients here include homes close to Roman Catholic Church of St Thomas, Hagley Park Academy and Hob Hill CE/Methodist (VC) Primary School, among other places. The closest station to Upper Longdon is Rugeley Town station, about 2.1 miles north-west of the centre. A little further out are Cannock Castle Ring (1.5 miles south-west) and St Matthew's Hospital (3.2 miles south). Not far away are George's Hayes and Minster Pool.
What bath repair costs
Prices start from £95. You’ll know the full cost before you book. We look at:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- What the surface is made of
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
You can take the pictures on your phone. Just make sure we can see:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Something in shot to show the size
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say straight away if a repair is the right fix.
When we’d advise against a repair
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
Get a quote
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Common questions in Upper Longdon
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you cover Upper Longdon?
Yes. We cover the entire UK and come to Upper Longdon. Send photos and we’ll quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Staffordshire.
About our accreditations · Every repair comes with a one-year guarantee.
