Staffordshire · England
Bath chip & crack repair in Brereton, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Brereton. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Scuffs and scratches in the surface
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Bath repair in Brereton, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you are dealing with chips along the edge of the bath and impact holes in acrylic, we can typically put it right, whatever the material.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Brereton (WS15)
- County
- Staffordshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- How many areas need work
- Whether old repairs or coatings need taking off
- The material
- Doing more than one item at once
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed price
Before you send pictures, these tips help us give you a firm price:
- A photo taken from further back
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
Email us pictures of the damage and one of the whole item, and tell us you’re in Brereton, and we will come back with a fixed quote.
How to look after the repair
So the finish stays in good condition:
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
There is nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What a repair can’t fix
It helps to know what we can’t do too:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Questions from Brereton
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
It’s been repaired before. Can you still fix it?
Usually, yes. The old repair comes out first, so mention it when you send photos.
How much does bath repair cost in Brereton?
Repairs from £95. We give a fixed price from your pictures. Send a close-up and a photo of the whole item with your WS15 postcode.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What areas do you cover?
Everywhere in the UK, Brereton included. There’s no extra charge for travel.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Common problems we fix in Brereton
A cracked acrylic bath generally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
These are the problems we are asked about most:
- Cracks in an acrylic bath
- Chips along the edge of the bath
- A hole punched through by something heavy
- Rust by the waste and overflow
What your quote should include
- Whether they match the colour on site
- What the guarantee covers, and for how long
- If travel is included in the price
- Whether a trained technician does the job
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Why book with us
- One visit for most repairs
- A fixed quote before you book
- Same prices wherever you are
- Work done at your home or business
See our prices page and guide to resurfacing and replacement costs.
About Brereton
Brereton is about 1 mile south-east of Rugeley, in Staffordshire. We travel to homes and businesses in Brereton, so nothing has to leave your home. Brereton is one of 512 places in Staffordshire where we work. Our jobs stretch from Brereton to Birmingham (19 miles away).
Postcode districts we cover here: WS15. From Gorse Road, Larch Road and Lodge Road or anywhere nearby, a technician can come to you. We also travel to Breretonhill (1 mile south-east), Rugeley (1 mile north-west), Brereton Cross (1 mile south-east), Upper Longdon (1 mile south-east) and Slitting Mill (2 miles west). Within a short drive, we also cover Stafford (9 miles north-west), Burton upon Trent (13 miles east), Tamworth (13 miles south-east), Cannock (5 miles south-west), Lichfield (6 miles south-east) and Burntwood (5 miles south).
Landmarks near Brereton
Typical jobs here are in homes near Hagley Park Academy, Redbrook Hayes Community Primary School and Brereton Methodist Church, among other places. Also close by are The Hart School (1.5 miles north-west) and The Talbot Inn (within half a mile south-east). For rail, the closest station is Rugeley Town station, roughly 0.9 miles north-west of the centre. A little further out are Cannock Castle Ring (2.3 miles south) and St Matthew's Hospital (4.5 miles south). Open spaces near Brereton include George's Hayes.
Landlord and trade work in Brereton
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Brereton, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Places near Brereton
Also in Brereton
About our accreditations · Every repair comes with a one-year guarantee.
