County Durham · England

Bath Repair for Ushaw Moor homes

Damaged bath in Ushaw Moor? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • A hole punched through by something heavy
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Ushaw Moor?

How we handle bath repair in Ushaw Moor

Most of our bath repairs take a few hours, and you can generally bathe again the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. We work on acrylic, whirlpool & spa baths and roll-top & freestanding, and common reasons people contact us are chips along the edge of the bath and a chip where the taps sit.

Big or small, it’s backed by a one-year guarantee.

Location
Ushaw Moor (DH7)
Region
County Durham
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Common problems we fix in Ushaw Moor

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Keep an eye out for any of the following:

  • Cracks in an acrylic bath
  • Rust by the waste and overflow
  • Chips along the edge of the bath
  • Damage beneath the taps

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • Whether a trained technician does the job
  • How to care for the finish
  • Whether they match the colour on site

Choosing a repair company

How it works

The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.

Send pictures for a quote

Advice

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Rust that has eaten right through a steel bath
  • Acrylic cracks with no access behind them
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

How to look after the repair

A little care keeps the finish looking good. Our advice:

  • Rinse it down after each bath
  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale
  • Ensure an acrylic bath is firm underfoot

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

Landlords, agents and businesses in Ushaw Moor

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

FAQs for Ushaw Moor

Will the repair show?

We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Mention it when you send pictures.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Materials and what they mean for the repair

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Repair or replace in Ushaw Moor?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Colour-matched on site
  • Dust sheets down, tidy finish

Take a look at our full price list or guide to resurfacing and replacement costs.

Ushaw Moor and the surrounding area

Ushaw Moor is about 3 miles west of Durham, in County Durham. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Ushaw Moor is one of 329 towns and villages in County Durham we cover. We work right across the region, from Ushaw Moor to Newcastle upon Tyne (about 15 miles away).

Jobs in DH7 work the same way as everywhere else we cover. You will find streets such as Station Road, Lilac Park and Holly Park. Other places close to Ushaw Moor include Bearpark (1 mile north), Broompark (1 mile south-east), New Brancepeth (1 mile south-west), Langley Moor (2 miles south-east) and Brandon (2 miles south). We also work in nearby towns such as Durham (3 miles east), Consett (10 miles north-west), Newton Aycliffe (11 miles south), Bishop Auckland (9 miles south), Spennymoor (5 miles south) and Seaham (12 miles east).

Around Ushaw Moor

In Ushaw Moor, that means homes near Durham Community Business College, Church of St Edmund and Silver Tree Primary School & Nursery and the streets around them. Ushaw Moor’s nearest station is Durham station, about 2.2 miles east of the centre. A little further out are University Hospital of North Durham (2 miles north-east) and Ushaw Historic House (1.2 miles north-west).

  • Local facilities include Broom (0.7 miles east)
Map of Ushaw Moor © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.