Essex · England
Bath chip & crack repair in Virley, Essex
Our technicians come to Virley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Rusty patches near the plughole
Bath repair at your home in Virley
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We work on cast iron enamel, pressed steel enamel and acrylic, and common reasons people get in touch are chips under the taps and rust spots around the plughole.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Virley (CM9)
- Region
- Essex
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What we are called out for in Virley
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- A kit repair that didn’t last
- A chipped rim or side
- A hole punched through by something heavy
- A chip where the taps sit
Questions to ask before booking
- How the room is protected while they work
- Whether they match the colour on site
- If travel is included in the price
- Whether cleaning and preparation are in the price
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
How to get a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Nearby places to Virley
More services for Virley
Questions from Virley
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Do you cover Virley?
We do. Repair technicians travel to Virley from across the region, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
How long before I can use the bath?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The material and finish
- Unusual colours or finishes
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
We price nearly every job from pictures. This is what to send:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Where you are, by postcode
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Virley and the surrounding area
Virley is about 4 miles south-east of Tiptree, in Essex. Whether you are in the middle of Virley or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Virley is one of 644 towns and villages in Essex where we work. We work right across the region, from Virley to London (44 miles away).
We cover every part of CM9. If you are just outside Virley, we cover Salcott-cum-Virley (1 mile north-west), Tollesbury (2 miles south), Bradwell Waterside (4 miles south-east), St Lawrence Bay (4 miles south) and Ramsey Island (5 miles south). Larger places within reach include Colchester (8 miles north), Chelmsford (15 miles west), Braintree (13 miles north-west), Clacton-on-Sea (14 miles east), Maldon (8 miles south-west) and Witham (9 miles west).
Landmarks near Virley
In Virley, that means homes near Church of St Mary. Well-known places in the area include Anchor Press Museum (3.9 miles north-west) and Birch Castle (4.2 miles north). For a walk, there is Abbotts Hall Farm.
When we would advise against a repair
In fairness, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Aftercare tips
A little care keeps the finish looking good. Our advice:
- A dripping tap stains enamel, so fix it early
- Do not scrub with anything abrasive
- Store metal items away from the bath
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- No need to remove anything
- We leave the room as we found it
- Fixed prices from your pictures
- Technicians who travel to you, UK-wide
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
