Norfolk · England
Bath Repair in Wacton
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Wacton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips on the rim or sides
- Chips caused by builders
How we handle bath repair in Wacton
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We’re frequently asked to fix chips under the taps and impact holes in acrylic, across pressed steel enamel, acrylic and roll-top & freestanding.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Wacton (NR15)
- Region
- Norfolk
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Wacton: your questions answered
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How do I get a price for bath repair in Wacton?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How long before I can use the bath?
Normally the day after. We’ll tell you the exact curing time when we finish.
What happens after I send pictures?
You will get a fixed quote back. You’re under no obligation.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Also near Wacton
More services for Wacton
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Landlord and trade work in Wacton
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we are called out for in Wacton
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
You may need us if you’ve spotted any of these:
- A hole punched through by something heavy
- A cracked acrylic bath
- Deep scratches in acrylic
- Damage beneath the taps
Before you book anyone
- How to look after the finish
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
- How changes to the job are handled
What bath repair costs
Repairs from £95. Prices are worked out job by job, from your pictures. The main factors are:
- How hard the colour is to match
- Where the damage is and how we get to it
- How many items we do on one visit
- The type of damage
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
What we can’t put right
Some jobs aren’t right for a repair, including:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Where we work around Wacton
Wacton is about 7 miles south-east of Wymondham, in Norfolk. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We work in 797 places across Norfolk.
All of NR15 is within our area, from the main roads to the quietest streets. Whether you live on Church Road and Hall Lane or anywhere nearby, a technician can come to you. If you are just outside Wacton, we cover Bustard's Green (1 mile north-west), Long Stratton (1 mile north-east), Stratton St Michael (2 miles north-east), Morningthorpe (2 miles east) and Colegate End (3 miles south). Larger places within reach include Norwich (11 miles north), Wymondham (7 miles north-west), Sprowston (13 miles north), Thorpe St Andrew (12 miles north-east), Attleborough (9 miles west) and Norwich Lanes (11 miles north).
Near you in Wacton
Typical jobs here are in homes near Church of All Saints, Long Stratton High School and Manor Field Infant and Nursery School and the streets around them. A little further out are Norfolk Tank Museum (1.1 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
