Rutland · England
Bath chip & crack repair in Wardley, Rutland
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Wardley, with a one-year guarantee on every repair.
- Repairs from £95
- Deep scratches in acrylic
- A chipped rim or side
Looking after it afterwards
Nothing complicated is needed:
- If an acrylic bath flexes, have its feet adjusted
- Do not scrub with anything abrasive
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
About our bath repair in Wardley
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on acrylic, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about a cracked acrylic bath and chips along the edge of the bath.
Big or small, you get the same one-year guarantee.
- Where
- Wardley (LE15)
- County
- Rutland
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Repairs from £95. We charge the same across the UK, including Wardley. The price reflects:
- Previous DIY repairs that have to come out
- The type of damage
- What the surface is made of
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Phone photos are fine. Ensure they show:
- What it’s made of, if you know
- Natural light rather than flash
- A wider photo showing the entire bath
- Any earlier repairs or coatings
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Wardley, and we will reply with a fixed quote.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Repairing versus replacing in Wardley
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Generally one visit, start to finish
- Dust sheets down, tidy finish
- Same prices wherever you are
- Honest advice, even when it means no job
Read our prices page and resurfacing vs replacement cost guide.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Nearby places to Wardley
Other services in Wardley
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
Where we work around Wardley
Wardley is about 6 miles south of Oakham, in Rutland. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 47 towns and villages across Rutland. We work right across the region, from Wardley to Birmingham (about 48 miles away).
Every address in LE15 is within our area, from the main roads to the quietest streets. Nearby, we also work in Allexton (1 mile west), Stockerston (1 mile south), Uppingham (2 miles east), Lyddington (3 miles south-east) and Great Easton (5 miles south). We also work in nearby towns such as Oakham (6 miles north), Barleythorpe (6 miles north), Cottesmore (10 miles north-east), Langham (7 miles north), North Luffenham (7 miles east) and Whissendine (9 miles north).
What’s near Wardley
Locally, our jobs take us to homes close to St Botolph's Church and Uppingham Community College and the streets around them. A little further out are Sauvey Castle (4.2 miles north-west) and Hallaton Museum (3.7 miles south-west). The countryside around Wardley includes King's Hill and Great Merrible Wood.
Landlord and trade work in Wardley
If you manage property in Wardley, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
FAQs for Wardley
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Is a holed acrylic bath repairable?
Usually. Send us a picture of the hole and one from under the bath if you can.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
What a repair can’t fix
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
