Northamptonshire · England
Bath chip & crack repair in Great Easton, Northamptonshire
Bath repair for Great Easton, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- A chip where the taps sit
- Rust spots around the plughole
About our bath repair in Great Easton
Most of our bath repairs take a few hours, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. Our repair technicians work on pressed steel enamel, acrylic and whirlpool & spa baths, and people most often call us about impact holes in acrylic and rusty patches near the plughole.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Great Easton (LE16)
- Region
- Northamptonshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Landlords, agents and businesses in Great Easton
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Great Easton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When we would advise against a repair
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Repair or replace in Great Easton?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Colour mixed on the day to match
- A fixed quote before booking
Read our pricing and guide to resurfacing and replacement costs.
Keeping it looking good
So the finish stays in good condition:
- Use a soft cloth and washing-up liquid for everyday cleaning
- A dripping tap stains enamel, so fix it early
- Don’t scrub with anything abrasive
- Do not leave razors or cans standing in the bath
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Also near Great Easton
Also in Great Easton
How we price bath repair
Repairs from £95. There is no charge for travel to Great Easton. The price depends on:
- Any earlier repairs that need removing first
- How many areas need work
- What the surface is made of
- The colour and finish to match
Our prices are the same across the UK, with no extra for Great Easton. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Where you are, by postcode
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- One picture of the entire bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
Our work in Great Easton
Great Easton is about 3 miles north-west of Corby, in Northamptonshire. We visit clients in Great Easton and the surrounding area, so nothing has to leave your home. We cover 364 places across Northamptonshire, from the larger towns to small villages. Our jobs stretch from Great Easton to Birmingham (about 48 miles away).
Jobs in LE16 work the same way as everywhere else we cover. Local streets include High Street, Moulds Lane and Brook Lane, all of which we cover. Nearby, we also work in Bringhurst (1 mile south-west), Drayton (1 mile south-west), Caldecott (1 mile east), Rockingham (1 mile south-east) and Cottingham (2 miles south). We also work in nearby towns such as Corby (3 miles south-east), Kettering (9 miles south), Market Harborough (8 miles south-west), Desborough (7 miles south-west), Irthlingborough (15 miles south) and Burton Latimer (12 miles south).
Local landmarks in Great Easton
Locally, our jobs take us to homes close to The Sun Public House, Bringhurst Primary School and Church of St Andrew and the streets around them. Great Easton’s nearest station is Corby station, about 3.9 miles south-east of the centre. Well-known places in the area include Rockingham Castle (1.6 miles south-east). For a walk, there’s Great Merrible Wood and King's Hill.
Common questions in Great Easton
When can I have a bath again?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Do you cover Great Easton?
Yes, we do. Technicians travel to Great Easton from across the region, and the price is the same as everywhere else.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What does bath repair cost?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
About our accreditations · Every repair comes with a one-year guarantee.
