Kent · England
Bath Repair for Warren Street homes
Damaged bath in Warren Street? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Impact holes in acrylic
Bath repair in Warren Street, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and people most frequently call us about snagging damage from a refit and a chip where the taps sit.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Warren Street (ME17)
- Area hub
- Kent
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Warren Street
Which areas do you work in?
All of Kent, and the rest of the UK. There’s no extra charge for travel.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can a cracked acrylic bath be fixed?
Usually, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
When can I have a bath again?
Generally the next day. We confirm the time before we leave.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Places near Warren Street
Other services in Warren Street
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Store metal items away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave a fresh chip for long
- Put a towel in the bath if you’re working above it
There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
What we are called out for in Warren Street
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
Common reasons people in Warren Street contact us are:
- Chips along the edge of the bath
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Snagging damage from a refit
What to look for in a quote
- If travel is included in the price
- Whether a trained technician does the job
- Whether the colour is mixed to match
- How to look after the finish
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why book with us
- Every repair guaranteed for a year
- Nothing taken out or refitted
- Usually one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or guide to resurfacing and replacement costs.
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Warren Street
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a few hours, depending on the damage in most cases. The room is left tidy and you will know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
Before we arrive
- Let us know about parking or access
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Warren Street and nearby
Warren Street is about 7 miles south of Sittingbourne, in Kent. We travel to homes and businesses in Warren Street and nearby villages, so nothing has to leave your home. We cover all 922 towns and villages in Kent. Our nearest city page is London, about 41 miles away.
Postcode districts we cover here: ME17. Whether you live on Payden Street, Slade Road and Warren Street or anywhere nearby, we can come to you. Nearby, we also work in Payden Street (1 mile north-west), Cold Harbour (1 mile south-east), Woodside Green (1 mile west), West Street (2 miles west) and Wichling (2 miles north). Larger places within reach include Maidstone (10 miles west), Ashford (9 miles south-east), Canterbury (14 miles east), Sittingbourne (7 miles north), Whitstable (14 miles north-east) and Faversham (7 miles north-east).
Landmarks near Warren Street
Our clients here include homes close to The Harrow pub, Spuckles and Kennelling Woods and The Lenham School. The closest station to Warren Street is Lenham station, roughly 2.4 miles west of the centre. Well-known places in the area include Newnham Castle (3.3 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
