Monmouthshire · Wales
Bath chip & crack repair in Waunllapria, Monmouthshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Waunllapria and across Monmouthshire. Free, fixed quotes from your photos.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Chips caused by builders
Landlords, agents and businesses in Waunllapria
Landlords, letting agents and housing providers in Waunllapria use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
Bath repair at your home in Waunllapria
A typical bath repair is a few hours’ work, and you can typically bathe again the next day. There is no need to book a plumber or tiler, because the bath does not move. Whether it’s hairline or through cracks in acrylic and an old repair that has yellowed or come loose, we can usually put it right, on acrylic, whirlpool & spa baths and cast iron enamel alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Waunllapria (NP7)
- Region
- Monmouthshire
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
What affects the price in Waunllapria
Prices start from £95. You will know the full cost before you book. We take into account:
- How many areas need work
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
Our prices are the same across the UK, so there is no premium for Waunllapria. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
It only takes a minute to photograph the damage. Please include:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Something in shot to show the size
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
When to call us in Waunllapria
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
People usually call us after spotting something like this:
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- Chips caused by builders
What your quote should include
- What the guarantee covers, and for how long
- How soon you can use it again
- A fixed price, and whether VAT is included
- How changes to the job are handled
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
What you get with us
- One price list for the entire UK
- A fixed quote before you book
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
Read our full price list and guide to resurfacing and replacement costs.
About Waunllapria
Waunllapria is about 4 miles east of Ebbw Vale, in Monmouthshire. Anywhere in NP7, a technician comes to you. We cover all 115 towns and villages in Monmouthshire. Our nearest city page is Birmingham, about 70 miles away.
We cover every part of NP7 and the streets around it. We regularly work on streets such as Rhiwr Road and Waenllapria. We also cover the places around Waunllapria: Llam-march (1 mile south-west), Clydach (1 mile north), Darrenfelen (1 mile west), Gellifelen (1 mile west) and Cwm Siôn Mathew (1 mile north). We also work in nearby towns such as Abergavenny (5 miles east), Pen-y-pound (5 miles east), Cantref (4 miles east), Grofield (4 miles east), Usk (12 miles south-east) and Llanfoist (4 miles east).
Local landmarks in Waunllapria
In Waunllapria, that means homes near Brynmawr Foundation School and The Jolly Colliers pub, among other places. For rail, the closest station is Ebbw Vale Town station, roughly 3.9 miles south-west. Further afield, we also cover the area around Battle Tump (2.3 miles north-east) and Blaenavon Hospital (2.4 miles south-east). Open spaces near Waunllapria include Winchestown lake and Pen-rhiw-Ifor.
- Local facilities include Llanwenarth Ultra (2.2 miles east)
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Clear the area around the damage
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Also near Waunllapria
Other services in Waunllapria
Waunllapria questions
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Which areas do you work in?
The entire UK, including all of Monmouthshire. Send your postcode with your pictures and we will confirm dates.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
