East Sussex · England
Bath Repair in Wellbrook
We travel to Wellbrook for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rusty patches near the plughole
- Chips along the edge of the bath
Bath repair in Wellbrook, done in place
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. If you’re dealing with a kit repair that didn’t last and damage done while the bathroom was being fitted, we can help, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Wellbrook (TN20)
- Area hub
- East Sussex
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Landlords, agents and businesses in Wellbrook
If you manage property in Wellbrook, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What affects the price in Wellbrook
Prices start from £95. You will not pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How many items we do on one visit
The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
How to get a fixed price
Phone photos are fine, there’s no need for anything special. Make sure they show:
- One sharp close-up of the damage
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- One picture of the whole bath
If you’re in Wellbrook and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About Wellbrook
Wellbrook is about 4 miles south-east of Crowborough, in East Sussex. Customers in Wellbrook get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Wellbrook is one of 289 towns and villages in East Sussex where we work. We work right across the region, from Wellbrook to London (37 miles away).
All of TN20 is within our area, from the main roads to the quietest streets. That includes homes on Rothermead, Roselands Avenue and Wellbrook. If you’re just outside Wellbrook, we cover Woolbridge (1 mile north-west), Mayfield (1 mile north-east), Butcher's Cross (1 mile west), Skippers Hill (1 mile south-west) and Five Ashes (1 mile south-west). Further out, we also cover Bexhill-on-Sea (15 miles south-east), Lewes (14 miles south-west), Hailsham (10 miles south), Crowborough (4 miles north-west), Uckfield (7 miles south-west) and Polegate (13 miles south).
Around Wellbrook
Our customers here include homes close to The Royal Oak Inn, St Leonards-Mayfield School and Mayfield Church of England Primary School, among other places. For rail, the closest station is Crowborough station, roughly 3.3 miles north-west. Other landmarks nearby include Crowborough War Memorial Hospital (4.6 miles north-west). The countryside around Wellbrook includes Crowborough Country Park.
Signs you need bath repair in Wellbrook
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
The most common problems we’re called about are:
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Damage beneath the taps
- Rust by the waste and overflow
Comparing quotes
- When it can be used again
- Whether they match the colour on site
- How the room is protected while they work
- Whether the price is fixed and includes VAT
What we cannot put right
It helps to know what we cannot do:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Repair or replace in Wellbrook?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Wellbrook. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Honest advice, even when it means no job
- No need to remove anything
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
Wellbrook: your questions answered
What areas do you cover?
The whole UK, including all of East Sussex. Send your postcode with your pictures and we will offer you dates.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long before I can use the bath?
Generally within a day, though it depends on what we’ve done.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Also in Wellbrook
How it works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Let us know about parking or access
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
