Monmouthshire · Wales
Bath Repair for Werngifford homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Werngifford, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- Rust by the waste and overflow
How we handle bath repair in Werngifford
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you are dealing with rusty patches near the plughole and scratches you can feel with a fingernail, we can normally put it right, on cast iron enamel, pressed steel enamel and acrylic alike.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Werngifford (NP7)
- County
- Monmouthshire
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price is based on:
- Doing more than one item at once
- The material and finish
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Questions from Werngifford
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Monmouthshire.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
What areas do you cover?
Across the UK. Prices do not change with location.
Common problems we fix in Werngifford
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
It’s worth getting a quote if you see:
- Chips under the taps
- Rust spots around the plughole
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
What to look for in a quote
- What preparation is included
- What happens if they find more damage
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
Werngifford and the surrounding area
Werngifford is about 5 miles north-east of Abergavenny, in Monmouthshire. Customers in Werngifford get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We work in all 115 towns and villages in Monmouthshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 61 miles away.
Our technicians cover all of the NP7 postcode area and the streets around it. Nearby, we also work in Llanvihangel Crucorney (1 mile south-west), Pandy (1 mile north), Walterstone Common (3 miles north-east), Caggle Street (3 miles south-east) and Llanvetherine (3 miles south-east). Further out, we also cover Abergavenny (5 miles south-west), Monmouth (12 miles south-east), Pen-y-pound (5 miles south-west), Cantref (5 miles south-west), Grofield (5 miles south-west) and Overmonnow (12 miles south-east).
Around Werngifford
In Werngifford, that means homes near St. Michael and All Angels, Llanfihangel Crucorney C.P. School and Rising Sun pub. Further afield, we also cover the area around Pen y Clawdd Castle (1.6 miles south-west) and Maindiff Court Hospital (3.8 miles south). For a walk, there is Pen Llwygy and White Castle moat.
What we can’t put right
We’ll always be straight with you, so here’s what a repair will not do:
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
Landlords, agents and businesses in Werngifford
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Repair or replace in Werngifford?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- We’ll tell you if it’s not worth repairing
- No need to remove anything
- CHAS and Constructionline accredited
- No extra charge for your area
See our pricing and bath cost comparison.
Also near Werngifford
What else we do in Werngifford
About our accreditations · Every repair comes with a one-year guarantee.
