North Yorkshire · England
Bath chip & crack repair in West Burton, North Yorkshire
Fixed-price bath repair in West Burton and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Damage beneath the taps
- Impact holes in acrylic
How we handle bath repair in West Burton
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are chips on the rim or sides and chips under the taps.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- West Burton (DL8)
- Region
- North Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly before booking.
Materials we work on in West Burton
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Nearby places to West Burton
What else we do in West Burton
What happens on the day
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Our work in West Burton
West Burton is about 13 miles south-west of Catterick Garrison, in North Yorkshire. We travel to homes and businesses in West Burton and nearby villages, so there is no workshop to go to. West Burton is one of 626 towns and villages in North Yorkshire where we work. We work right across the region, from West Burton to Leeds (37 miles away).
All of DL8 is within our area. Jobs here include addresses on Front Nook and Back Nook. We also cover the places around West Burton: Aysgarth (1 mile north-west), Thoralby (1 mile west), Newbiggin (1 mile west), Swinithwaite (2 miles north-east) and Thoresby (3 miles north-east). Within a short drive, we also cover Catterick Garrison (13 miles north-east), Richmond (13 miles north-east), Colburn (13 miles north-east), Bedale (15 miles east), Grassington (14 miles south) and Catterick (15 miles north-east).
Around West Burton
Our clients here include homes close to West Burton Church of England Primary School, Church of Saint Andrew and Fox and Hounds pub and the streets around them. Nearby you will also find Yorkshire Museum of Carriages and Horse Drawn Vehicles (1.1 miles north) and Bolton Castle (3.3 miles north). Not far away are Penhill.
Signs you need bath repair in West Burton
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Get in touch if you’ve noticed any of these:
- A hole punched through by something heavy
- Snagging damage from a refit
- Rusty patches near the plughole
- Deep scratches in acrylic
Comparing quotes
- If travel is included in the price
- What aftercare is recommended
- The length of the guarantee and what it covers
- How long it needs to cure
Your questions about bath repair in West Burton
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
When can I have a bath again?
Typically within a day, though it depends on what we have done.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
Will there be a smell?
There may be a mild smell during the work.
How we price bath repair
Repairs from £95. You will know the full cost before you book. We take into account:
- How easy the damage is to reach
- What kind of damage it is
- How many areas need work
- The material
We charge the same wherever you are, so there is no premium for West Burton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- One sharp close-up of the damage
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
How to care for the repair
So the finish stays in good condition:
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Don’t leave razors or cans standing in the bath
- Give the bath a quick rinse after use
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Why repair rather than replace?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- CHAS and Constructionline accredited
Read our full price list and bath cost comparison.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
