Devon · England
Bath Repair for West Charleton homes
Local bath repair for West Charleton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Scuffs and scratches in the surface
Your questions about bath repair in West Charleton
Do you cover West Charleton?
Yes, we do. We send a technician to West Charleton for every job, and the price is the same as everywhere else.
Can you repair a hole in a bath?
Normally. Send us a picture of the hole and one from under the bath if you can.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
When can I have a bath again?
Usually the next day. We’ll tell you the exact curing time when we finish.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
How we handle bath repair in West Charleton
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Typical jobs include chips under the taps and a failed DIY repair that’s discoloured or lifting, on pressed steel enamel, roll-top & freestanding and cast iron enamel.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Area
- West Charleton (TQ7)
- Area hub
- Devon
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near West Charleton
What else we do in West Charleton
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Where we work around West Charleton
West Charleton is about 13 miles south-west of Brixham, in Devon. Across the TQ7 area, a technician comes to you. We work in 586 places in Devon, from the larger towns to small villages.
Here we cover the TQ7 postcode area. We regularly work on streets such as Saunders Way, Lyte Lane and Compton Road. We also travel to Frogmore (1 mile east), Kingsbridge (2 miles north-west), Sherford (2 miles north-east), West Alvington (2 miles west) and Higher Batson (2 miles south-west). We also work in nearby towns such as Ivybridge (11 miles north-west), Totnes (11 miles north), Dartmouth (9 miles north-east), Bridgetown (11 miles north), Townstal (9 miles north-east) and Buckfastleigh (15 miles north).
Around West Charleton
We visit homes around Kingsbridge Academy, Charleton Church of England Academy and Ashburton Arms and the streets around them. A little further out are South Hams Hospital (1.9 miles north-west) and Salcombe Castle (3.1 miles south-west). Green spaces nearby include Slapton Ley and South Efford Marsh.
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Fixed prices from your photos
- Everything repaired in place
- CHAS and Constructionline accredited
- One-year guarantee on every repair
See our full price list and bath cost comparison.
How to care for the repair
To keep it looking its best:
- A dripping tap stains enamel, so fix it early
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Common problems we fix in West Charleton
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Contact us if you’ve noticed any of these:
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
- Rusty patches near the plughole
Before booking anyone
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- What prep work is covered
- How to care for the finish
Landlords, agents and businesses in West Charleton
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams in Devon and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
What affects the price in West Charleton
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- What the surface is made of
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The size and number of damaged areas
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- Details of any past repairs
- Something in shot to show the size
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
