Devon · England

Bath and surface repairs in TQ7

Our technicians cover all of the TQ7 postcode district, which takes in Kingsbridge, Loddiswell and Chillington. Everything is repaired in place, with a one-year guarantee.

Book a repair in TQ7

How bath repair works in TQ7

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Typical jobs include chips along the edge of the bath and rusty patches near the plughole, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Pricing in TQ7

Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why book with us

  • Free fixed quotes from pictures
  • Everything repaired in place
  • Colour mixed on the day to match
  • One price list for the entire UK

Ask for a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

What’s near Kingsbridge

Our clients here include homes close to Evangelical Church, Kingsbridge Academy and King Of Prussia Inn and the streets around them. Further afield, we also cover the area around South Hams Hospital (under half a mile north-west) and Salcombe Castle (3.9 miles south). For a walk, there’s South Efford Marsh.

Signs you need bath repair

Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Typical reasons for a call-out include:

  • A cracked acrylic bath
  • Damage done while the bathroom was being fitted
  • Rusty patches near the plughole
  • Holes from dropped items

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Repairs by material

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Repair or replace?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you.

What your quote should include

  • Whether they match the colour on site
  • How to care for the finish
  • Whether the price covers travel
  • Who will actually do the work

Landlord and trade work in TQ7

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Your questions about bath repair in TQ7

Do you come to TQ7?

Yes. We work across the UK and come to TQ7 and the rest of Devon. Send us pictures for a fixed quote, or call 0345 017 0787.

What does bath repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Is a bath repair durable?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send photos.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.