Newcastle upon Tyne · England

Bath Repair for West Denton homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in West Denton. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in West Denton

Bath repair at your home in West Denton

Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Common call-outs are for a hole punched through by something heavy and chips under the taps, across acrylic, pressed steel enamel and cast iron enamel.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Where
West Denton (NE5, NE15)
Region
Newcastle upon Tyne
Cover
12 months on all our work
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Questions from West Denton

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can I get a quote without a visit?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Is a cracked acrylic bath repairable?

Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Is a holed acrylic bath repairable?

Often, if there is access underneath. We back the hole, fill it and refinish the surface.

When we would advise against a repair

We’ll always be straight with you, so here’s what a repair can’t fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Leaking fittings, which need a plumber
  • A steel bath rusted through

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths

How to care for the repair

After the repair has cured, a few habits help it last:

  • Ensure an acrylic bath is firm underfoot
  • Rinse the bath after use, especially in hard water areas
  • Don’t leave a fresh chip for long
  • Keep metal cans and razors off the surface

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Work for landlords and builders

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Landlords, letting agents and housing providers in West Denton use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

When to call us in West Denton

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

You may need us if you’ve spotted any of these:

  • Damage beneath the taps
  • A hole punched through by something heavy
  • Scuffs and scratches in the surface
  • An old repair that has yellowed or come loose

What to look for in a quote

  • The length of the guarantee and what it covers
  • When it can be used again
  • How to look after the finish
  • Whether cleaning and preparation are in the price

Choosing a repair company

What happens on the day

Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area
  • Plan for the room to be out of bounds to pets and children

Getting a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a free quote

Related advice

Covering West Denton

West Denton is about 3 miles west of Newcastle upon Tyne, in Newcastle upon Tyne. Whether you’re in the middle of West Denton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. West Denton is one of 63 towns and villages in Newcastle upon Tyne where we work.

Our visits in NE5 and NE15 are booked in the same way as anywhere else. Local streets include Rydal Road, Egham Road and Meadow Road, all of which we cover. Main roads around West Denton include the A69, which makes travel easy. We also cover the places around West Denton: Sugley (1 mile south), Walbottle (1 mile west), Newburn (2 miles west), Lemington (2 miles south-west) and Stella (2 miles south). We also work in nearby towns such as Newcastle upon Tyne (3 miles east), Bensham (5 miles south-east), Carr Hill (6 miles south-east), Low Fell (6 miles south-east), Deckham (5 miles south-east) and Sheriff Hill (6 miles south-east). As one of the bigger places in Newcastle upon Tyne, West Denton is somewhere we visit frequently.

Near you in West Denton

We visit homes around Church of the Holy Nativity, Benwell Nature Park and West Denton Primary School. For rail, the closest station is Blaydon station, roughly 1.8 miles south of the centre. Other landmarks nearby include Newburn Hall Motor Museum (1.5 miles west) and Metrocentre (2.8 miles south-east). The countryside around West Denton includes Addison and Hedgefield Woods and Bent Hill.

  • Parks and local facilities nearby include Denton (0.5 miles north-west)
Map of West Denton © OpenStreetMap contributors

How we price bath repair

Prices start from £95. We give every job a fixed quote from photos. These are the things that affect it:

  • How many areas need work
  • The colour and finish to match
  • Any earlier repairs that need removing first
  • How easy the damage is to reach

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • Any earlier repairs or coatings

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.