Hertfordshire · England
Bath Repair in Whempstead
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Whempstead, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Whempstead. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Whempstead
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Free fixed quotes from pictures
Take a look at our pricing or resurfacing vs replacement cost guide.
Bath repair in Whempstead without replacing anything
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We’re frequently asked to fix a chip where the taps sit and snagging damage from a refit, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Whempstead (SG12)
- County
- Hertfordshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Whempstead
Also in Whempstead
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Ask for a price
Send us pictures of the damage and a wider shot of the entire item, with your SG12 postcode, and we’ll reply with a fixed quote.
Advice
How we price bath repair
Prices start from £95. You will know the full cost before booking. We look at:
- Whether we combine several jobs
- Access to the area
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
You can generally get a fixed quote without us visiting. To make it quick:
- A picture taken from further back
- Natural light rather than flash
- Where you are, by postcode
- Whether it’s been repaired or coated before
For a price in Whempstead, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
When we’d advise against a repair
We won’t take on work that won’t last, so these are the limits:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Where we work around Whempstead
Whempstead is about 5 miles south-east of Stevenage, in Hertfordshire. Our repair technicians come to homes and businesses in Whempstead and the surrounding area, so there’s no workshop to go to. We work in 381 places across Hertfordshire. We work right across the region, from Whempstead to London (26 miles away).
Postcode districts we cover here: SG12. Whether you live on Whempstead Road and Mill Lane or anywhere nearby, a technician can come to you. If you’re just outside Whempstead, we cover Dane End (1 mile east), Burn's Green (1 mile north-west), Sacombe (1 mile south-east), Haultwick (2 miles north-east) and Sacombe Green (2 miles south-east). Larger places within reach include Stevenage (5 miles north-west), St Albans (13 miles south-west), Bishop's Stortford (10 miles east), Welwyn Garden City (7 miles south-west), Harpenden (12 miles west) and Hitchin (9 miles north-west).
Near you in Whempstead
Typical jobs here are in homes near Parish Church of All Saints and Munden Church of England Voluntary Controlled Primary School. Whempstead’s nearest station is Watton-At-Stone station, about 1.8 miles south-west of the centre. Well-known places in the area include Hertford County Hospital (5.4 miles south) and Benington Castle (2 miles north-west). The countryside around Whempstead includes Astonbury Wood.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Landlord and trade work in Whempstead
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Hertfordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Whempstead: your questions answered
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is a cracked acrylic bath repairable?
Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SG12 postcode.
About our accreditations · Every repair comes with a one-year guarantee.
