Cheshire West and Chester · England

Bath chip & crack repair in Whitby, Cheshire West and Chester

Bath repair across Whitby and nearby, done in a single visit in most cases.

  • Repairs from £95
  • A chipped rim or side
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Whitby homes

Bath repair in Whitby without replacing anything

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We’re often asked to fix rust spots around the plughole and damage beneath the taps, in cast iron enamel, acrylic and roll-top & freestanding.

All our work is covered by our one-year guarantee.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Whitby (CH65, CH34, CH66)
Region
Cheshire West and Chester
Guarantee
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Do not leave a fresh chip for long
  • Ensure an acrylic bath is firm underfoot
  • Avoid scourers, wire wool and gritty cream cleaners
  • Do not leave razors or cans standing in the bath

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

The process

We turn up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Let us know which floor the room is on
  • Tell us about any previous repairs or coatings

How to get a price

Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Whitby, and we’ll reply with a fixed quote.

Get a free quote

Advice

Whitby questions

Can you fix rust around the plughole?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

What happens once I’ve sent pictures?

We come back with a fixed price. There is no obligation to book.

Can you repair a hole in a bath?

Frequently, if there is access underneath. The hole is backed, filled and refinished to match.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Can you redo an old repair?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

Can I get a quote without a visit?

Generally, yes. Clear pictures let us give you a fixed quote without visiting.

Do you repair coloured baths?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Covering Whitby

Whitby is about 1 mile east of Ellesmere Port, in Cheshire West and Chester. Our technicians come to homes and businesses in Whitby, so nothing has to leave your home. We work in all 224 towns and villages across Cheshire West and Chester. We work right across the region, from Whitby to Liverpool (9 miles away).

Every address in CH65, CH34 and CH66 is within our area. Local streets include Vale Road, Park Road and West Road. You will find Whitby on the A5032, so it’s easy for us to reach. Close by, we cover Ellesmere Port (1 mile west), Great Sutton (1 mile north-west), Hope Farm (1 mile south-west), Overpool (1 mile north-west) and Strawberry Park (1 mile south-west). Within a short drive, we also cover Chester (6 miles south), Neston (7 miles west), Boughton (6 miles south), Frodsham (8 miles east), Hoole (6 miles south) and Hartford (15 miles east). Whitby is among the bigger towns we cover in Cheshire West and Chester.

Landmarks near Whitby

In Whitby, that means homes near Station Hotel, Whitby Park and St. Thomas and the streets around them. Other local landmarks include Ellesmere Port Church of England College (less than half a mile north-west) and William Stockton Community Primary School (within half a mile north). The nearest railway station is Ellesmere Port station, about 0.6 miles north-east of the centre. A little further out are Ellesmere Port Hospital (0.6 miles south-west) and Cheshire Oaks Designer Outlet (1.1 miles south-east). For a walk, there’s Gowy Meadows Nature Reserve.

  • Other local spots include Municipal Borough of Ellesmere Port (0.5 miles north-east)
Map of Whitby © OpenStreetMap contributors

Repair or replace: which is better?

Many people think a damaged bath means a new one. Generally it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why Whitby clients choose us

  • Honest advice, even when it means no job
  • Rooms protected and left tidy
  • Most jobs done in one visit
  • One-year guarantee on every repair

See our full price list and resurfacing vs replacement cost guide.

Landlord and trade work in Whitby

Housing associations and facilities teams use us for planned and reactive repairs in Cheshire West and Chester and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

When we would advise against a repair

In fairness, there are a few things a repair won’t fix:

  • Cracks in acrylic we can’t reach from underneath
  • A steel bath rusted through
  • Flexing caused by a failed cradle or loose feet

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

Prices and what affects them

Repairs from £95. We don’t charge extra for travel to Whitby. The price comes down to:

  • How many items we do on one visit
  • How hard the colour is to match
  • The size and number of damaged areas
  • Where the damage is and how we get to it

Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • The material, if you know it

The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say straight away whether it can be repaired.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Do you need bath repair in Whitby?

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.

Send us a photo if you notice any of these:

  • Rust spots around the plughole
  • Cracks in an acrylic bath
  • Impact holes in acrylic
  • Chips on the rim or sides

Questions to ask before booking

  • What protection goes down before work starts
  • How soon you can use it again
  • A fixed price, and whether VAT is included
  • Whether there are any call-out or travel charges

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.