Pembrokeshire · Wales
Bath chip & crack repair in Whitchurch, Pembrokeshire
Damaged bath in Whitchurch? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rust spots around the plughole
- A hole punched through by something heavy
Bath repair in Whitchurch without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for chips caused by builders and chips on the rim or sides, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding.
You get a one-year guarantee, the same in Whitchurch as everywhere else we work.
- Where
- Whitchurch (SA62)
- County
- Pembrokeshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
It’s all simple stuff:
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Also near Whitchurch
Also in Whitchurch
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Do you need bath repair in Whitchurch?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
If you can see any of these, send us a picture:
- Scuffs and scratches in the surface
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Questions to ask before booking
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- How the colour is matched
- If travel is included in the price
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
What affects the price in Whitchurch
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- What the surface is made of
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- What kind of damage it is
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- One picture of the whole bath
- The material, if you know it
Email us a picture of the damage and one of the whole item, with your SA62 postcode, and we’ll reply with a fixed quote.
Whitchurch and nearby
Whitchurch is about 11 miles north-west of Haverfordwest, in Pembrokeshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover 223 places in Pembrokeshire.
Here we cover the SA62 postcode area. We also cover the places around Whitchurch: Middle Mill (1 mile north-east), Solfach (1 mile south), Lower Solva (1 mile south-east), Solva (1 mile south-east) and St Elvis (1 mile south-east). We also work in nearby towns such as Haverfordwest (11 miles south-east), Milford Haven (14 miles south-east), The Marsh (12 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (14 miles south-east).
Local landmarks in Whitchurch
Locally, our jobs take us to homes close to Royal George pub and Church of St.David and the streets around them. Nearby you’ll also find Y Castell (under half a mile east) and Whitewell (3 miles west). The countryside around Whitchurch includes Gewni.
Repair or replace in Whitchurch?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
- Same prices wherever you are
Read our full price list or guide to resurfacing and replacement costs.
FAQs for Whitchurch
What areas do you cover?
Across the UK, and that includes Whitchurch. Prices do not change with location.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you come to Whitchurch?
We do. Repair technicians travel to Whitchurch from across the region, with no extra charge for travel.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How much does bath repair cost in Whitchurch?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Honest limits
Before you book, it’s worth knowing the limits:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Landlord and trade work in Whitchurch
Housing associations and facilities teams use us for planned and reactive repairs in Pembrokeshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
