Cumbria · England
Bath chip & crack repair in Whitehaven, Cumbria
Damaged bath in Whitehaven? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A kit repair that didn’t last
- A cracked acrylic bath
FAQs for Whitehaven
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
When can I have a bath again?
Usually the day after. We will tell you the exact curing time when we finish.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Whitehaven.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Bath repair at your home in Whitehaven
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Common call-outs are for chips on the rim or sides and chips caused by builders, across cast iron enamel, roll-top & freestanding and acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Whitehaven (CA28)
- Area hub
- Cumbria
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- What kind of damage it is
- The colour and finish to match
- Whether old repairs or coatings need taking off
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- What it’s made of, if you know
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips, and we’ll tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the next day, the bath is ready to use.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
- Ensure the area is dry
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Also near Whitehaven
More services for Whitehaven
Common problems we fix in Whitehaven
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- A kit repair that didn’t last
- Deep scratches in acrylic
- Rust spots around the plughole
- Hairline or through cracks in acrylic
What your quote should include
- How long it needs to cure
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- How the colour is matched
Repairing versus replacing in Whitehaven
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why choose Surface Doctor in Whitehaven
- Straight answers about what a repair can do
- No extra charge for your area
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Read our prices page and resurfacing vs replacement cost guide.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Landlord and trade work in Whitehaven
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think.
What we work on
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Whitehaven and nearby
Whitehaven is about 33 miles north-west of Barrow-in-Furness, in Cumbria. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover all 438 towns and villages across Cumbria, from the larger towns to small villages.
We work across CA28 and the streets around it. We regularly work on streets such as Albert Square, Main Street and High Street. Whitehaven is on the A595 and A5094, which makes it straightforward to reach. Close by, we cover Kells (1 mile west), Hensingham (1 mile south-east), Bransty (1 mile north-west), Quality Corner (2 miles north) and Moresby Parks (2 miles north-east). Within a short drive, we also cover Workington (7 miles north), Maryport (12 miles north), Cockermouth (12 miles north-east), Moorclose (6 miles north), Cleator Moor (3 miles south-east) and Egremont (4 miles south-east). Whitehaven is one of the larger places we cover in Cumbria.
Near you in Whitehaven
Around Whitehaven, we work in homes near The Glass House, Monkwray Junior School and St Benedict's Catholic High School, among other places. Whitehaven has its own railway station: Corkickle station. Nearby you’ll also find Hayes Castle (3.6 miles north) and West Cumberland Hospital (1 mile south-east). Not far away are Clints Quarry.
About our accreditations · Every repair comes with a one-year guarantee.
